Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC 7030U MITSUBISHI ENGINEERING JAPAN
IUPILON™
Medical Supplies,Home appliance components
High mobility
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7030U |
---|---|---|---|
dielectric constant | ASTM D150/IEC 60250 | 25.2 | |
Volume resistivity | ASTM D257/IEC 60093 | 4×10^16 Ω.cm |
Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7030U |
---|---|---|---|
Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 880 kg·cm/cm(J/M)ft·lb/in | |
bending strength | ASTM D790/ISO 178 | 88.2 kg/cm²(MPa)[Lb/in²] | |
Flexural modulus | ASTM D790/ISO 178 | 2300 kg/cm²(MPa)[Lb/in²] | |
elongation | ASTM D638/ISO 527 | 110 % | |
Rockwell hardness | ASTM D785 | R120 | |
tensile strength | ASTM D638/ISO 527 | 60.8mpa kg/cm²(MPa)[Lb/in²] |
physical property | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7030U |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.2 g/cm³ | |
Shrinkage rate | ASTM D955 | 0.6% % | |
Water absorption rate | 23℃/24H | ASTM D570/ISO 62 | 0.15% % |
Thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7030U |
---|---|---|---|
Combustibility (rate) | UL 94 | V-2 | |
Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 5.6 mm/mm.℃ |
Contact Us
Get App
Top