Material Comparison
Add Comparison Model
Select Products for Comparison (1/4)
Highlight Differences
Hide Same
Product Name / Manufacturer / Model
Grade
Reference Price
| mechanical properties | Test Condition | Test Method | LATI ITALY/G/30 |
|---|---|---|---|
| tensile strength | Break,120°C | ISO 527-2/5 | 80.0 Mpa |
| Tensile strain | Break,23°C | ISO 527-2/5 | 1.9 % |
| Tensile modulus | 90°C | ISO 527-2/1 | 7500 Mpa |
| Tensile strain | Break,60°C | ISO 527-2/5 | 1.8 % |
| tensile strength | Break,90°C | ISO 527-2/5 | 95.0 Mpa |
| Tensile strain | Break,120°C | ISO 527-2/5 | 1.7 % |
| Tensile modulus | 150°C | ISO 527-2/1 | 7000 Mpa |
| tensile strength | Break,23°C | ISO 527-2/5 | 120 Mpa |
| Tensile strain | Break,150°C | ISO 527-2/5 | 1.6 % |
| tensile strength | Break,150°C | ISO 527-2/5 | 70.0 Mpa |
| Tensile modulus | 60°C | ISO 527-2/1 | 7700 Mpa |
| tensile strength | Break,60°C | ISO 527-2/5 | 110 Mpa |
| Tensile strain | Break,90°C | ISO 527-2/5 | 1.8 % |
| Tensile modulus | 23°C | ISO 527-2/1 | 8000 Mpa |
| 120°C | ISO 527-2/1 | 7300 Mpa | |
| Physical properties | Test Condition | Test Method | LATI ITALY/G/30 |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.060 % |
| Shrinkage rate | TD:2.00mm | ISO 294-4 | 0.45-0.60 % |
| MD:2.00mm | ISO 294-4 | 0.10-0.30 % | |
| thermal performance | Test Condition | Test Method | LATI ITALY/G/30 |
| Linear coefficient of thermal expansion | MD:30to100°C | ISO 11359-2 | 6E-06 cm/cm/°C |
| Hot deformation temperature | 连续使用温度3 | 160 °C | |
| 0.45MPa,Unannealed | ISO 75-2/B | 190 °C | |
| 1.8MPa,Unannealed | ISO 75-2/A | 185 °C | |
| Vicat softening temperature | ISO 306/B50 | 185 °C | |
| flammability | Test Condition | Test Method | LATI ITALY/G/30 |
| Extreme Oxygen Index | ASTM D2863 | 38 % | |
| UL flame retardant rating | 3.0mm | UL 94 | V-0 |
| Burning wire flammability index | 2.0mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| Burning wire flammability index | 1.0mm | IEC 60695-2-12 | 960 °C |
| impact performance | Test Condition | Test Method | LATI ITALY/G/30 |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 35 kJ/m² |
