Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PSU G/30 LATI ITALY
LATAMID
--
Filler: Glass fiber reinf,30% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | LATI ITALY/G/30 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 190 °C |
连续使用温度3 | 160 °C | ||
1.8MPa,Unannealed | ISO 75-2/A | 185 °C | |
Linear coefficient of thermal expansion | MD:30to100°C | ISO 11359-2 | 6E-06 cm/cm/°C |
Vicat softening temperature | ISO 306/B50 | 185 °C |
mechanical properties | Test Condition | Test Method | LATI ITALY/G/30 |
---|---|---|---|
Tensile modulus | 120°C | ISO 527-2/1 | 7300 Mpa |
60°C | ISO 527-2/1 | 7700 Mpa | |
90°C | ISO 527-2/1 | 7500 Mpa | |
150°C | ISO 527-2/1 | 7000 Mpa | |
23°C | ISO 527-2/1 | 8000 Mpa | |
Tensile strain | Break,90°C | ISO 527-2/5 | 1.8 % |
Break,23°C | ISO 527-2/5 | 1.9 % | |
Break,120°C | ISO 527-2/5 | 1.7 % | |
Break,150°C | ISO 527-2/5 | 1.6 % | |
Break,60°C | ISO 527-2/5 | 1.8 % | |
tensile strength | Break,23°C | ISO 527-2/5 | 120 Mpa |
Break,90°C | ISO 527-2/5 | 95.0 Mpa | |
Break,60°C | ISO 527-2/5 | 110 Mpa | |
Break,150°C | ISO 527-2/5 | 70.0 Mpa | |
Break,120°C | ISO 527-2/5 | 80.0 Mpa |
Electrical performance | Test Condition | Test Method | LATI ITALY/G/30 |
---|---|---|---|
Compared to the anti leakage trace index | SolutionA | IEC 60112 | V |
Physical properties | Test Condition | Test Method | LATI ITALY/G/30 |
---|---|---|---|
Shrinkage rate | TD:2.00mm | ISO 294-4 | 0.45-0.60 % |
MD:2.00mm | ISO 294-4 | 0.10-0.30 % | |
Water absorption rate | 23°C,24hr | ISO 62 | 0.060 % |
impact performance | Test Condition | Test Method | LATI ITALY/G/30 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 35 kJ/m² |
flammability | Test Condition | Test Method | LATI ITALY/G/30 |
---|---|---|---|
Burning wire flammability index | 1.0mm | IEC 60695-2-12 | 960 °C |
2.0mm | IEC 60695-2-12 | 960 °C | |
Extreme Oxygen Index | ASTM D2863 | 38 % | |
UL flame retardant rating | 3.0mm | UL 94 | V-0 |
1.5mm | UL 94 | V-0 |