Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 Nivionplast® A R306GY NAT SO.F.TER ITALY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SO.F.TER ITALY/Nivionplast® A R306GY NAT |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 95 J/m |
| Mechanical properties | Test Condition | Test Method | SO.F.TER ITALY/Nivionplast® A R306GY NAT |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.0 % |
| Tensile modulus | ASTM D638 | 10000 MPa | |
| tensile strength | 断裂 | ASTM D638 | 180 MPa |
| Flexural modulus | ASTM D790 | 8500 MPa | |
| bending strength | ASTM D790 | 270 MPa |
| flammability | Test Condition | Test Method | SO.F.TER ITALY/Nivionplast® A R306GY NAT |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | HB |
| physical property | Test Condition | Test Method | SO.F.TER ITALY/Nivionplast® A R306GY NAT |
|---|---|---|---|
| Shrinkage rate | 内部方法 | 0.40 % | |
| ash content | 内部方法 | 30 % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 1.9 % |
| 饱和,23°C | ISO 62 | 5.5 % | |
| density | ASTM D792 | 1.36 g/cm³ |
| Thermal performance | Test Condition | Test Method | SO.F.TER ITALY/Nivionplast® A R306GY NAT |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 245 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 250 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 2.5E-05 cm/cm/°C |
| melting temperature | ASTM D3417 | 260 °C |
Contact Us
Get App
Top