Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA612 151 NC010 DUPONT USA
Zytel®
Engineering accessories、Automotive Applications、Engine parts
Mineral reinforcement、Thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | DUPONT USA/151 NC010 |
|---|---|---|---|
| Glass Transition Temperature | ISO11357-2 | 65.0 °C | |
| Heat Deflection Temperature | 0.45MPa,未退火 | ISO75-2/B | 135 °C |
| Linear thermal expansion coefficient | TD：-- | ISO11359-2 | 1.2E-04 cm/cm/°C |
| TD：55to160°C | ISO11359-2 | 1.8E-04 cm/cm/°C | |
| Heat Deflection Temperature | 1.8MPa,未退火 | ISO75-2/A | 62.0 °C |
| Linear thermal expansion coefficient | MD：55to160°C | ISO11359-2 | 1.6E-04 cm/cm/°C |
| Melting Temperature | ISO11357-3 | 218 °C | |
| Linear thermal expansion coefficient | MD：-40to23°C | ISO11359-2 | 9E-05 cm/cm/°C |
| Vicat Softening Temperature | ISO306/B50 | 181 °C | |
| Linear thermal expansion coefficient | MD：-- | ISO11359-2 | 1.1E-04 cm/cm/°C |
| TD：-40to23°C | ISO11359-2 | 9E-05 cm/cm/°C |
| Hardness | Test Condition | Test Method | DUPONT USA/151 NC010 |
|---|---|---|---|
| Rockwell Hardness | R级 | ISO2039-2 | 114 |
| Films Properties | Test Condition | Test Method | DUPONT USA/151 NC010 |
|---|---|---|---|
| Tensile Strain (MD) | Yield | ISO527-3 | 4.5 % |
| Additional | Test Condition | Test Method | DUPONT USA/151 NC010 |
|---|---|---|---|
| Odor | VDA270 | 4.50 | |
| EmissionofOrganicCompounds | VDA277 | 3.10 µgC/g |
| Physical | Test Condition | Test Method | DUPONT USA/151 NC010 |
|---|---|---|---|
| SpecificHeatCapacityofMelt | 2750 J/kg/°C | ||
| Moisture Absorption | 平衡,23°C,2.00mm,50%RH | ISO62 | 1.3 % |
| Modeling Shrinkage | TD：3.20mm | 1.1 % | |
| Moisture Absorption | 饱和,23°C,2.00mm | ISO62 | 3.0 % |
| Viscosity number | 96%H2SO4 | ISO307 | 95.0 cm³/g |
| MediumDensity | 0.900 g/cm³ | ||
| Modeling Shrinkage | TD | ISO294-4 | 1.4 % |
| MD | ISO294-4 | 1.3 % | |
| ThermalConductivityofMelt | 0.18 W/m/K | ||
| Modeling Shrinkage | MD：3.20mm | 1.1 % |
| Mechanical Properties | Test Condition | Test Method | DUPONT USA/151 NC010 |
|---|---|---|---|
| Flexural Modulus | ISO178 | 2100 Mpa | |
| Tensile Strain | 屈服 | ISO527-2 | 4.5 % |
| Tensile Stress | 屈服 | ISO527-2 | 62.0 Mpa |
| Nominal Tensile Strain at Break | ISO527-2 | 17 % | |
| Tensile Modulus | ISO527-2 | 2400 Mpa |
| Impact Properties | Test Condition | Test Method | DUPONT USA/151 NC010 |
|---|---|---|---|
| Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | NoBreak |
| 23°C | ISO179/1eU | NoBreak |
| Flammability | Test Condition | Test Method | DUPONT USA/151 NC010 |
|---|---|---|---|
| FMVSS Flammability | FMVSS302 | DNI | |
| Flame Rating | 0.9mm | UL94 | V-2 |
| Oxygen Index | ISO4589-2 | 27 % | |
| Flame Rating | 1.5mm | UL94 | V-2 |
| 0.9mm | IEC60695-11-10,-20 | V-2 | |
| 1.5mm | IEC60695-11-10,-20 | V-2 |
| Electrical Properties | Test Condition | Test Method | DUPONT USA/151 NC010 |
|---|---|---|---|
| Dielectric Strength | IEC60243-1 | 30 KV/mm | |
| Volume Resistivity | IEC60093 | 1E+15 ohms·cm | |
| Comparative Tracking Index | IEC60112 | 600 V | |
| Surface Resistivity | IEC60093 | -- ohms | |
| Relative Permittivity | 1MHz | IEC60250 | 3.20 |
| 100Hz | IEC60250 | 3.60 | |
| Dissipation Factor? | 1MHz | IEC60250 | 0.016 |
| 100Hz | IEC60250 | 0.014 |
Contact Us
Get App
Top