Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Unspecified Flexane® Fast Cure Rubber Repair Putty Devcon
--
Repair materials
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Devcon/Flexane® Fast Cure Rubber Repair Putty |
|---|---|---|---|
| Shore hardness | ShoreA | ASTM D2240 | 88 |
| thermal performance | Test Condition | Test Method | Devcon/Flexane® Fast Cure Rubber Repair Putty |
|---|---|---|---|
| Maximum operating temperature | Dry | 82 °C | |
| Wet | 49 °C |
| mechanical properties | Test Condition | Test Method | Devcon/Flexane® Fast Cure Rubber Repair Putty |
|---|---|---|---|
| Wear amount | 220 mg/1000cycles |
| Electrical performance | Test Condition | Test Method | Devcon/Flexane® Fast Cure Rubber Repair Putty |
|---|---|---|---|
| Dielectric strength | ASTM D149 | 14 kV/mm |
| thermosetting | Test Condition | Test Method | Devcon/Flexane® Fast Cure Rubber Repair Putty |
|---|---|---|---|
| Thermosetting components | Pot Life(24°C) | 8.0 min | |
| Hardener | 按重量计算的混合比:20 | ||
| Resin | 按重量计算的混合比:80 |
| Uncured Properties | Test Condition | Test Method | Devcon/Flexane® Fast Cure Rubber Repair Putty |
|---|---|---|---|
| Curing time | 3.0 hr |
| Physical properties | Test Condition | Test Method | Devcon/Flexane® Fast Cure Rubber Repair Putty |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D2566 | 0.14 % |
| Solid content by volume | 100 % | ||
| Specific volume | 0.849 cm³/g |
| elastomer | Test Condition | Test Method | Devcon/Flexane® Fast Cure Rubber Repair Putty |
|---|---|---|---|
| elongation | Break | ASTM D412 | 500 % |
| tear strength | ASTM D624 | 48.2 kN/m | |
| tensile strength | ASTM D412 | 16.5 MPa |