Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TP, Unspecified MEGOLON™ HF 8142 NATURAL UV Alphagary
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Alphagary/MEGOLON™ HF 8142 NATURAL UV |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 57to63 |
| 邵氏D,15秒 | ASTM D2240 | 48to54 |
| Electrical performance | Test Condition | Test Method | Alphagary/MEGOLON™ HF 8142 NATURAL UV |
|---|---|---|---|
| dielectric constant | 23°C,100MHz | ASTM D150 | 3.49 |
| 23°C,350MHz | ASTM D150 | 3.45 | |
| 23°C,600MHz | ASTM D150 | 3.41 | |
| 23°C,1MHz | ASTM D150 | 3.58 | |
| Dissipation Factor | 23°C,100MHz | ASTM D150 | 0.014 |
| 23°C,200MHz | ASTM D150 | 0.012 | |
| 23°C,350MHz | ASTM D150 | 0.010 | |
| 23°C,600MHz | ASTM D150 | 8.5E-03 | |
| 23°C,1MHz | ASTM D150 | 0.022 | |
| dielectric constant | 23°C,200MHz | ASTM D150 | 3.46 |
| Dissipation Factor | 23°C,1.00GHz | ASTM D150 | 7.9E-03 |
| dielectric constant | 23°C,1.00GHz | ASTM D150 | 3.38 |
| flammability | Test Condition | Test Method | Alphagary/MEGOLON™ HF 8142 NATURAL UV |
|---|---|---|---|
| Acid gas release | pH | IEC 60754-2 | 5.40 |
| Limiting Oxygen Index | 3.18mm | ASTM D2863 | 44 % |
| smoke index | NES711 | 5.35 | |
| Acid gas release | IEC 60754-2 | 0.380 µS/mm | |
| HalogenContent | -- | IEC 754-1 | <5 mg/g |
| -- | MILC-24643 | 0 % | |
| toxicity | NES713 | 4.60 |
| aging | Test Condition | Test Method | Alphagary/MEGOLON™ HF 8142 NATURAL UV |
|---|---|---|---|
| Change rate of ultimate elongation in air | 136°C,168hr | UL Unspecified | -13 % |
| elongation at break | 70°C,4hr,inASTM#2Oil | UL Unspecified | 22 % |
| Change rate of tensile strength in air | 136°C,168hr | UL Unspecified | -6.0 % |
| 70°C,4hr,inASTM#2Oil | UL Unspecified | -29 % |
| physical property | Test Condition | Test Method | Alphagary/MEGOLON™ HF 8142 NATURAL UV |
|---|---|---|---|
| melt mass-flow rate | 190°C/10.0kg | ASTM D1238 | 2.5 g/10min |
| density | ASTM D792 | 1.47to1.53 g/cm³ |
| elastomer | Test Condition | Test Method | Alphagary/MEGOLON™ HF 8142 NATURAL UV |
|---|---|---|---|
| tensile strength | 0.762mm | ASTM D412 | 11.7 MPa |
| elongation | 断裂,0.762mm | ASTM D412 | 130 % |
| Thermal performance | Test Condition | Test Method | Alphagary/MEGOLON™ HF 8142 NATURAL UV |
|---|---|---|---|
| TemperatureIndex | NES715 | >355 °C | |
| brittle temperature | ASTM D746 | -20.0 °C | |
| Hot pressing test | 80°C，%损耗 | IEC 811-3-1 | 20 % |
Contact Us
Get App
Top