Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 HiFill® PA6/6 GF13 L Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PA6/6 GF13 L |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 75 J/m |
| hardness | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PA6/6 GF13 L |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 115 |
| Electrical performance | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PA6/6 GF13 L |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+15 ohms·cm | |
| dielectric strength | ASTM D149 | 19 kV/mm |
| Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PA6/6 GF13 L |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.0 % |
| Flexural modulus | ASTM D790 | 4830 MPa | |
| tensile strength | 断裂 | ASTM D638 | 112 MPa |
| bending strength | ASTM D790 | 174 MPa |
| physical property | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PA6/6 GF13 L |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 1.8 % |
| density | ASTM D792 | 1.23 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.60 % |
| Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PA6/6 GF13 L |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 221 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 252 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3.2E-05 cm/cm/°C |
Contact Us
Get App
Top