Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Prime PP COPP 792 Primex Plastics Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Primex Plastics Corporation/Prime PP COPP 792 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 22°C | ASTM D256 | 无断裂 |
| Supplementary Information | Test Condition | Test Method | Primex Plastics Corporation/Prime PP COPP 792 |
|---|---|---|---|
| MoldTemperature (other) | Rollfed | 10to32 °C | |
| Demoulding temperature | <88 °C | ||
| MoldTemperature (other) | Cutsheet | 32to66 °C | |
| 成型温度 | 177 °C |
| hardness | Test Condition | Test Method | Primex Plastics Corporation/Prime PP COPP 792 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 75 |
| Mechanical properties | Test Condition | Test Method | Primex Plastics Corporation/Prime PP COPP 792 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | >500 % |
| Flexural modulus | ASTM D790 | 1340 MPa | |
| tensile strength | 屈服 | ASTM D638 | 27.6 MPa |
| flammability | Test Condition | Test Method | Primex Plastics Corporation/Prime PP COPP 792 |
|---|---|---|---|
| UL flame retardant rating | 0.9mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Primex Plastics Corporation/Prime PP COPP 792 |
|---|---|---|---|
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 0.50 g/10min |
| density | ASTM D792 | 0.898 g/cm³ |
| Thermal performance | Test Condition | Test Method | Primex Plastics Corporation/Prime PP COPP 792 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 87.8 °C |
Contact Us
Get App
Top