Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS高胶粉 HH-120 INEOS STYRO THAILAND
Luran®
--
heat-resisting
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | INEOS STYRO THAILAND/HH-120 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179 | 21 kJ/m² |
| 23°C | ISO 179 | 20 kJ/m² |
| hardness | Test Condition | Test Method | INEOS STYRO THAILAND/HH-120 |
|---|---|---|---|
| Rockwell hardness | M级 | 84 | |
| ball-indentation hardness | ISO 2039-1 | 175 Mpa |
| Mechanical properties | Test Condition | Test Method | INEOS STYRO THAILAND/HH-120 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 3900 Mpa | |
| Tensile strain | 断裂,23°C | ISO 527-2 | 3.0 % |
| bending strength | ISO 178 | 135 Mpa | |
| tensile strength | 屈服,23°C | ISO 527-2 | 79.0 Mpa |
| Electrical performance | Test Condition | Test Method | INEOS STYRO THAILAND/HH-120 |
|---|---|---|---|
| dielectric constant | 100Hz | IEC 60250 | 3.00 |
| Volume resistivity | IEC 60093 | 1E+16 ohms·cm | |
| Dissipation Factor | 100Hz | IEC 60250 | 5E-03 |
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 7E-03 |
| optical performance | Test Condition | Test Method | INEOS STYRO THAILAND/HH-120 |
|---|---|---|---|
| transmissivity | 550nm | ASTM D1003 | >89.0 % |
| Haze ratio | ASTM D1003 | <1.0 % | |
| refractive index | ISO 489 | 1.567 |
| physical property | Test Condition | Test Method | INEOS STYRO THAILAND/HH-120 |
|---|---|---|---|
| Apparent density | 0.60 g/cm³ | ||
| Shrinkage rate | ISO 294-4 | 0.30-0.70 % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.30 % |
| Melt volume flow rate | 220°C/10.0kg | ISO 1133 | 7.00 cm3/10min |
| Thermal performance | Test Condition | Test Method | INEOS STYRO THAILAND/HH-120 |
|---|---|---|---|
| thermal conductivity | DIN 52612 | 0.17 W/m/K | |
| Heat distortion temperature | 1.8MPa,Annealed，HDT | ISO 75-2/A | 104 °C |
| vicat | ISO 306/B50 | 120 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 7E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,Annealed，HDT | ISO 75-2/B | 110 °C |
Contact Us
Get App
Top