Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Alkyd Generic Alkyd - Mineral Generic
--
--
Filler, glass fiber reinforced material,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Generic/Generic Alkyd - Mineral |
|---|---|---|---|
| Babbitt hardness | ASTM D2583 | 60to65 |
| thermal performance | Test Condition | Test Method | Generic/Generic Alkyd - Mineral |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 232to260 °C |
| mechanical properties | Test Condition | Test Method | Generic/Generic Alkyd - Mineral |
|---|---|---|---|
| bending strength | Yield,23°C | ASTM D790 | 82.7to105 MPa |
| compressive strength | 23°C | ASTM D695 | 124to159 MPa |
| Electrical performance | Test Condition | Test Method | Generic/Generic Alkyd - Mineral |
|---|---|---|---|
| Arc resistance | ASTM D495 | 180to186 sec | |
| Dielectric constant | 23°C | ASTM D150 | 5.98to7.30 |
| Dielectric strength | 23°C | ASTM D149 | 12to13 kV/mm |
| Dissipation factor | 23°C | ASTM D150 | 0.010to0.070 |
| Physical properties | Test Condition | Test Method | Generic/Generic Alkyd - Mineral |
|---|---|---|---|
| density | ASTM D792 | 2.09to2.15 g/cm³ | |
| Shrinkage rate | MD:23°C | ASTM D955 | 0.30to0.45 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.050to0.30 % |
| impact performance | Test Condition | Test Method | Generic/Generic Alkyd - Mineral |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 77to160 J/m |