Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
FEP Fluoroplastic FEP 6303Z 3M USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | 3M USA/ Fluoroplastic FEP 6303Z |
|---|---|---|---|
| MITFoldingEndurance-doublefolds | 200.0µm | ASTM D2176 | 170000 |
| Mechanical properties | Test Condition | Test Method | 3M USA/ Fluoroplastic FEP 6303Z |
|---|---|---|---|
| Tensile strain | 断裂,23°C | ISO 527-2 | 350 % |
| Tensile modulus | ISO 527-2 | 650 MPa | |
| tensile strength | 断裂,23°C | ISO 527-2 | 30.0 MPa |
| Electrical performance | Test Condition | Test Method | 3M USA/ Fluoroplastic FEP 6303Z |
|---|---|---|---|
| dielectric strength | 0.250mm | ASTM D149 | 64 kV/mm |
| dielectric constant | 23°C,1MHz | ASTM D150 | <2.15 |
| Dissipation Factor | 1MHz | ASTM D150 | <7.0E-4 |
| dielectric constant | 23°C,9.40GHz | ASTM D150 | 2.06 |
| Dissipation Factor | 9.40GHz | ASTM D150 | 4E-04 |
| flammability | Test Condition | Test Method | 3M USA/ Fluoroplastic FEP 6303Z |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | |
| Limiting Oxygen Index | ASTM D2863 | >95 % |
| physical property | Test Condition | Test Method | 3M USA/ Fluoroplastic FEP 6303Z |
|---|---|---|---|
| density | ISO 12086 | 2.14 g/cm³ | |
| melt mass-flow rate | 372°C/5.0kg | ISO 1133 | 3.0 g/10min |
| Thermal performance | Test Condition | Test Method | 3M USA/ Fluoroplastic FEP 6303Z |
|---|---|---|---|
| melting temperature | ISO 12086 | 258 °C |
Contact Us
Get App
Top