Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC/ABS MB8900 MITSUBISHI ENGINEERING JAPAN
IUPILON™
Shell,Electronic and Electrical Applications
heat-resisting,High impact resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/MB8900 |
---|---|---|---|
0.45MPa, unannealed | ISO 75-2/B | 86.0 °C | |
1.8MPa, unannealed | ISO 75-2/A | 77.0 °C |
mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/MB8900 |
---|---|---|---|
Bending modulus | ISO 178 | 2600 Mpa | |
bending strength | ISO 178 | 88.0 Mpa | |
Nominal tensile fracture strain | ISO 527-2 | 44 % | |
Tensile modulus | ISO 527-2 | 2800 Mpa | |
Tensile strain | Yield | ISO 527-2 | 3.5 % |
tensile strength | Yield | ISO 527-2 | 55.0 Mpa |
Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/MB8900 |
---|---|---|---|
melt mass-flow rate | 260°C/2.16kg | ISO 1133 | 25 g/10min |
Melt Volume Flow Rate (MVR) | 260°C/2.16kg | ISO 1133 | 23.0 cm3/10min |
Shrinkage rate | 吸水率(Saturation,23°C) | 0.20 % | |
MD:3.20mm | 0.25-0.45 % | ||
TD:3.20mm | 0.25-0.45 % |
impact performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/MB8900 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179 | 无断裂 |
flammability | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/MB8900 |
---|---|---|---|
UL flame retardant rating | 1.00mm | UL 94 | V-1 |
1.50mm | UL 94 | 5VB |