Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PP STATEX® 18 ITW FORMEX
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | ITW FORMEX/STATEX® 18 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 106 °C |
| RTI | UL 746 | 100 °C | |
| RTI Elec | UL 746 | 100 °C |
| film | Test Condition | Test Method | ITW FORMEX/STATEX® 18 |
|---|---|---|---|
| film thickness | 360to560 µm | ||
| tensile strength | MD:Yield | ASTM D882 | 33.1 MPa |
| TD:Yield | ASTM D882 | 24.8 MPa |
| Electrical performance | Test Condition | Test Method | ITW FORMEX/STATEX® 18 |
|---|---|---|---|
| Compared to the anti leakage trace index | CTI | ASTM D3638 | PLC 0 |
| Dielectric constant | ASTM D150 | 2.30 | |
| Dielectric strength | ASTM D149 | 27500 V | |
| ASTM D149 | 60 kV/mm | ||
| Dissipation factor | ASTM D150 | 9E-04 | |
| High arc combustion index | HAI | UL 746 | PLC 3 |
| High voltage arc tracing rate | HVTR | UL 746 | mm/min |
| Hot wire ignition | HWI | UL 746 | PLC 4 sec |
| StaticDecay | ASTM D257 | <2.0 sec | |
| Surface resistivity | ASTM D257 | 1.0E+10到1.0E+12 ohms | |
| Volume resistivity | ASTM D257 | 1.5E+17 ohms·cm |
| Physical properties | Test Condition | Test Method | ITW FORMEX/STATEX® 18 |
|---|---|---|---|
| density | ASTM D792 | 0.988 g/cm³ | |
| Water absorption rate | Saturation | ASTM D570 | 0.010 % |
| flammability | Test Condition | Test Method | ITW FORMEX/STATEX® 18 |
|---|---|---|---|
| Extreme Oxygen Index | ASTM D2863 | 28 % | |
| UL flame retardant rating | UL 94 | V-0 |