Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC BESTPOLUX PCA65 TRIESA SPAIN
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | TRIESA SPAIN/BESTPOLUX PCA65 |
|---|---|---|---|
| Shore hardness | ShoreD | ISO 868 | 80 |
| thermal performance | Test Condition | Test Method | TRIESA SPAIN/BESTPOLUX PCA65 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 120 °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 100 °C | |
| Vicat softening temperature | ISO 306 | 125 °C |
| mechanical properties | Test Condition | Test Method | TRIESA SPAIN/BESTPOLUX PCA65 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2200 MPa | |
| Tensile strain | Break | ISO 527-2 | >50 % |
| tensile strength | ISO 527-2 | 50.0 MPa |
| Electrical performance | Test Condition | Test Method | TRIESA SPAIN/BESTPOLUX PCA65 |
|---|---|---|---|
| Dielectric strength | IEC 60243-1 | 35 kV/mm | |
| Surface resistivity | IEC 60093 | <1.0E+16 ohms |
| Physical properties | Test Condition | Test Method | TRIESA SPAIN/BESTPOLUX PCA65 |
|---|---|---|---|
| density | ISO 1183 | 1.15 g/cm³ | |
| humidity | 颗粒 | ISO 1110 | 0.20 % |
| melt mass-flow rate | ISO 1133 | 25 g/10min | |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 % |
| impact performance | Test Condition | Test Method | TRIESA SPAIN/BESTPOLUX PCA65 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ISO 180 | 38 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180 | 无断裂 |
| flammability | Test Condition | Test Method | TRIESA SPAIN/BESTPOLUX PCA65 |
|---|---|---|---|
| Burning rate | FMVSS302 | <100 mm/min | |
| UL flame retardant rating | UL 94 | HB |