Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO(PPE)+PS PRL PPX/NY-G10 Polymer Resources Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Polymer Resources Ltd./PRL PPX/NY-G10 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 48 J/m |
| Mechanical properties | Test Condition | Test Method | Polymer Resources Ltd./PRL PPX/NY-G10 |
|---|---|---|---|
| Flexural modulus | 3.17mm | ASTM D790 | 3520 MPa |
| tensile strength | 屈服,3.17mm | ASTM D638 | 86.2 MPa |
| Break,3.18mm | ASTM D638 | 86.2 MPa | |
| bending strength | 3.18mm | ASTM D790 | 141 MPa |
| physical property | Test Condition | Test Method | Polymer Resources Ltd./PRL PPX/NY-G10 |
|---|---|---|---|
| melt mass-flow rate | 300°C/3.8kg | ASTM D1238 | 2.0to8.0 g/10min |
| density | ASTM D792 | 1.18 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.50to1.0 % |
| Thermal performance | Test Condition | Test Method | Polymer Resources Ltd./PRL PPX/NY-G10 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火,3.18mm，HDT | ASTM D648 | 204 °C |
| 1.8MPa,未退火,3.18mm，HDT | ASTM D648 | 216 °C |
Contact Us
Get App
Top