Material Comparison
Add Comparison Model
Select Products for Comparison (1/4)
Highlight Differences
Hide Same
Product Name / Manufacturer / Model
Grade
Reference Price
| mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-5 |
|---|---|---|---|
| bending strength | ISO 178 | 75.0 Mpa | |
| Nominal tensile fracture strain | ISO 527-2 | 17 % | |
| Bending modulus | ISO 178 | 2200 Mpa | |
| Tensile modulus | ISO 527-2 | 2350 Mpa | |
| tensile strength | ISO 527-2 | 55.0 Mpa | |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-5 |
| Volume resistivity | IEC 60093 | 1E+14 ohms·cm | |
| Surface resistivity | IEC 60093 | 1E+16 ohms | |
| Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-5 |
| Melt Volume Flow Rate (MVR) | 190°C/2.16kg | ISO 1133 | 8.00 cm3/10min |
| Shrinkage rate | TD:2.00mm | ISO 294-4 | 2.0 % |
| melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 9.0 g/10min |
| Shrinkage rate | MD:2.00mm | ISO 294-4 | 2.0 % |
| flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-5 |
| UL flame retardant rating | UL 94 | HB | |
| Supplementary Information | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-5 |
| ColourNumber | CF2001 | ||
| thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-5 |
| Linear coefficient of thermal expansion | MD:23to55°C | Internal Method | 1.2E-04 cm/cm/°C |
| TD:23to55°C | Internal Method | 1.2E-04 cm/cm/°C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 87.0 °C |
