Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 SX218V60 BK SOLVAY FRANCE
TECHNYL®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SOLVAY FRANCE/SX218V60 BK |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 85 kJ/m² |
| 23°C | ISO 180/1U | 90 kJ/m² |
| Mechanical properties | Test Condition | Test Method | SOLVAY FRANCE/SX218V60 BK |
|---|---|---|---|
| Tensile modulus | 23°C | ISO 527-2/1A | 21000 Mpa |
| Tensile strain | 断裂, 23°C | ISO 527-2 | 2.3 % |
| Tensile stress | 断裂, 23°C | ISO 527-2/1A | 240 Mpa |
| Flexural modulus | 23°C | ISO 178 | 19500 Mpa |
| Bending stress | 23°C | ISO 178 | 380 Mpa |
| flammability | Test Condition | Test Method | SOLVAY FRANCE/SX218V60 BK |
|---|---|---|---|
| UL flame retardant rating | 1.6 mm | UL 94 | HB |
| physical property | Test Condition | Test Method | SOLVAY FRANCE/SX218V60 BK |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 1.0 % |
| 24 hr, 23°C | ISO 62 | 0.55 % | |
| Shrinkage rate | 流量 | ISO 294-4 | 0.30 % |
| 横向流量 | ISO 294-4 | 0.40 % |
| Thermal performance | Test Condition | Test Method | SOLVAY FRANCE/SX218V60 BK |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 222 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火 | ISO 75-2/Af | 215 °C |
| injection | Test Condition | Test Method | SOLVAY FRANCE/SX218V60 BK |
|---|---|---|---|
| Temperature | 60 到 90 °C | ||
| Temperature at the rear of the barrel | 230 到 235 °C | ||
| drying temperature | 80 °C | ||
| Temperature at the front of the material cylinder | 245 到 250 °C | ||
| Suggested maximum moisture content | 0.20 % | ||
| Temperature in the middle of the barrel | 235 到 245 °C |
Contact Us
Get App
Top