Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 A216V15 SOLVAY SHANGHAI
--
Industrial applications,Electrical field,Electronic field,Household appliances,Household appliances,Pulley,Laptop case,Engine parts
dimensional stability ,High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | SOLVAY SHANGHAI/A216V15 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/Af | 75.0 °C |
0.45MPa,Unannealed | ISO 75-2/Bf | 200 °C | |
0.45MPa,Unannealed | ASTM D648 | 220 °C | |
Melting temperature | ISO 11357-3 | 263 °C |
mechanical properties | Test Condition | Test Method | SOLVAY SHANGHAI/A216V15 |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 2800 Mpa |
23°C | ASTM D790 | 3000 Mpa | |
bending strength | 23°C | ASTM D790 | 125 Mpa |
23°C | ISO 178 | 120 Mpa | |
elongation | Break,23°C | ASTM D638 | 30 % |
Tensile modulus | 23°C | ISO 527-2/1A | 3200 Mpa |
Tensile strain | Yield,23°C | ISO 527-2 | 4.5 % |
Break,23°C | ISO 527-2 | >30 % | |
tensile strength | Yield,23°C | ISO 527-2/1A | 85.0 Mpa |
Break,23°C | ISO 527-2/1A | 55.0 Mpa | |
Yield,23°C | ASTM D638 | 85.0 Mpa |
Electrical performance | Test Condition | Test Method | SOLVAY SHANGHAI/A216V15 |
---|---|---|---|
Compared to the anti leakage trace index | SolutionB | IEC 60112 | PLC 1 |
SolutionA | IEC 60112 | PLC 0 | |
Dielectric strength | 2.00mm | IEC 60243-1 | 25 KV/mm |
Dissipation factor | IEC 60250 | 0.030 | |
Relative permittivity | IEC 60250 | 2.90 | |
Surface resistivity | IEC 60093 | 1E+15 ohms | |
Volume resistivity | IEC 60093 | 1E+15 ohms·cm |
Physical properties | Test Condition | Test Method | SOLVAY SHANGHAI/A216V15 |
---|---|---|---|
Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 2.9 % |
23°C,24hr | ISO 62 | 1.3 % |
impact performance | Test Condition | Test Method | SOLVAY SHANGHAI/A216V15 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | NoBreak |
Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | NoBreak |
flammability | Test Condition | Test Method | SOLVAY SHANGHAI/A216V15 |
---|---|---|---|
Burning wire flammability index | 0.8mm | IEC 60695-2-12 | 650 °C |
Extreme Oxygen Index | ISO 4589-2 | 26 % | |
Ignition temperature of heating wire | 1.6mm | IEC 60695-2-13 | 650 °C |
UL flame retardant rating | 3.2mm | UL 94 | V-2 |
1.6mm | UL 94 | V-2 |