Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP P7-45FG-0790 ASAHI JAPAN
--
--
Thermal stability、Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | ASAHI JAPAN/P7-45FG-0790 |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 2.5 g/10min |
| Mechanical properties | Test Condition | Test Method | ASAHI JAPAN/P7-45FG-0790 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D-4812 | 14 ft-lb/in | |
| bending strength | ISO 178 | 168 Mpa | |
| Flexural modulus | ISO 178 | 10300 Mpa | |
| ASTM D-790 | 8760 Mpa | ||
| bending strength | ASTM D-790 | 165 Mpa | |
| elongation | ASTM D-638 | 2 % | |
| Impact strength of cantilever beam gap | ASTM D-256 | 1.9 ft-lb/in | |
| tensile strength | ASTM D-638 | 121 Mpa | |
| ISO 527-2 | 110 Mpa |
| physical property | Test Condition | Test Method | ASAHI JAPAN/P7-45FG-0790 |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.003 in/in | |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 2.0 g/10min |
| Thermal performance | Test Condition | Test Method | ASAHI JAPAN/P7-45FG-0790 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa，HDT | ASTM D-648 | 156 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 151 °C |
Contact Us
Get App
Top