Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/PBT 5220-BK1066 SABIC INNOVATIVE US
XENOY™
Automotive Applications、Casters、Plastic bag
Glass fiber reinforced、Low warpage
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/5220-BK1066 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 55 kJ/m² |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 60.0 J |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 30 kJ/m² |
| 23°C | ISO 180/1A | 50 kJ/m² |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/5220-BK1066 |
|---|---|---|---|
| High Voltage Arc Traceability Rate (HVTR) | HVTR | UL 746 | PLC 0 |
| High arc combustion index (HAI) | HAI | UL 746 | PLC 0 |
| Hot wire ignition (HWI) | HWI | UL 746 | PLC 3 |
| arc resistance | ASTM D495 | PLC 5 | |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 1 |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/5220-BK1066 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 2050 Mpa | |
| --4 | ASTM D638 | 2250 Mpa | |
| --3 | ASTM D638 | 2250 Mpa | |
| Tensile strain | Break | ASTM D638 | 120 % |
| 屈服 | ISO 527-2/50 | 4.0 % | |
| tensile strength | 断裂 | ISO 527-2/50 | 50.0 Mpa |
| Flexural modulus | 50.0mm跨距 | ASTM D790 | 2030 Mpa |
| tensile strength | 屈服 | ISO 527-2/50 | 50.0 Mpa |
| bending strength | 屈服,50.0mm跨距 | ASTM D790 | 84.0 Mpa |
| tensile strength | Break | ASTM D638 | 51.0 Mpa |
| Tensile strain | Yield | ASTM D638 | 4.0 % |
| bending strength | ISO 178 | 80.0 Mpa | |
| Flexural modulus | ISO 178 | 2000 Mpa | |
| tensile strength | 屈服 | ASTM D638 | 53.0 Mpa |
| Tensile strain | 断裂 | ISO 527-2/50 | 120 % |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE US/5220-BK1066 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/5220-BK1066 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.80-1.0 % |
| TD2 | 内部方法 | 0.80-1.0 % | |
| Outdoor applicability | UL 746C | f2 | |
| Melt volume flow rate | 250°C/5.0kg | ISO 1133 | 15.0 cm3/10min |
| melt mass-flow rate | 250°C/5.0kg | ISO 1133 | 16 g/10min |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.15 % |
| 饱和,23°C | ISO 62 | 0.50 % | |
| Specific volume | ASTM D792 | 0.830 cm³/g |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/5220-BK1066 |
|---|---|---|---|
| vicat | ASTM D152512 | 122 °C | |
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 99.0 °C |
| Linear coefficient of thermal expansion | TD：-40到40°C | ISO 11359-2 | 9E-05 cm/cm/°C |
| MD：-40到40°C | ASTME831 | 9.5E-05 cm/cm/°C | |
| MD：-40到40°C | ISO 11359-2 | 9.5E-05 cm/cm/°C | |
| Heat distortion temperature | 0.45MPa,未退火,6.40mm，HDT | ASTM D648 | 107 °C |
| RTI Str | UL 746 | 75.0 °C | |
| vicat | -- | ISO 306/B120 | 125 °C |
| Linear coefficient of thermal expansion | TD：-40到40°C | ASTME831 | 9E-05 cm/cm/°C |
| vicat | -- | ISO 306/B50 | 120 °C |
| Heat distortion temperature | 1.8MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Af | 75.0 °C |
| RTI Imp | UL 746 | 75.0 °C | |
| Heat distortion temperature | 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 84.0 °C |
| RTI Elec | UL 746 | 75.0 °C |
Contact Us
Get App
Top