plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT B 4500 BASF GERMANY
Ultradur® 
film,Pipe fittings
Food contact compliance
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodBASF GERMANY/B 4500
Ball Pressure TestISO 2039-1130 Mpa
thermal performanceTest ConditionTest MethodBASF GERMANY/B 4500
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B165 °C
1.8MPa,UnannealedISO 75-2/A65.0 °C
Linear coefficient of thermal expansionMD1.4E-04 cm/cm/°C
Melting temperatureISO 3146223 °C
mechanical propertiesTest ConditionTest MethodBASF GERMANY/B 4500
bending strength23°CISO 17885.0 Mpa
Nominal tensile fracture strain23°CISO 527-2>50 %
Tensile creep modulus1000hrISO 899-11200 Mpa
Tensile modulus23°CISO 527-22500 Mpa
Tensile strainYield,23°CISO 527-23.7 %
tensile strengthYield,23°CISO 527-255.0 Mpa
Electrical performanceTest ConditionTest MethodBASF GERMANY/B 4500
Compared to the anti leakage trace indexIEC 60112 V
Dielectric constant1MHzIEC 602503.30
100HzIEC 602503.30
Dissipation factor1MHzIEC 602500.020
100HzIEC 602501E-03
Surface resistivityIEC 600931E+13 ohms
Volume resistivityIEC 600931E+14 ohms·cm
Physical propertiesTest ConditionTest MethodBASF GERMANY/B 4500
densityISO 11831.30 g/cm³
Melt Volume Flow Rate (MVR)250°C/2.16kgISO 113319.0 cm3/10min
Viscosity value降低的粘度ISO 1628130.0 ml/g
Water absorption rateEquilibrium,23°C,50%RHISO 620.25 %
Saturation,23°CISO 620.50 %
impact performanceTest ConditionTest MethodBASF GERMANY/B 4500
Charpy Notched Impact Strength23°CISO 1796.0 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179290 kJ/m²
flammabilityTest ConditionTest MethodBASF GERMANY/B 4500
UL flame retardant rating1.5mmUL 94HB