Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HDPE VENELENE® 7700M Poliolefinas Internacionales, C.A. (Polinter)
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Poliolefinas Internacionales, C.A. (Polinter)/VENELENE® 7700M |
|---|---|---|---|
| GardnerImpact | ASTM D5420 | 90.0 J/cm |
| Supplementary Information | Test Condition | Test Method | Poliolefinas Internacionales, C.A. (Polinter)/VENELENE® 7700M |
|---|---|---|---|
| Slow Crack Growth (PENT) | ASTMF1473 | >150 hr |
| Mechanical properties | Test Condition | Test Method | Poliolefinas Internacionales, C.A. (Polinter)/VENELENE® 7700M |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | >1500 % |
| Flexural modulus | ASTM D790 | 950 MPa | |
| tensile strength | 断裂 | ASTM D638 | 30.0 MPa |
| 屈服 | ASTM D638 | 26.0 MPa | |
| bending strength | 5.0%应变 | ASTM D790 | 15.0 MPa |
| resilience | ASTM D638 | 300 MPa |
| physical property | Test Condition | Test Method | Poliolefinas Internacionales, C.A. (Polinter)/VENELENE® 7700M |
|---|---|---|---|
| melt mass-flow rate | 190°C/21.6kg | ASTM D1238 | 13 g/10min |
| density | ASTM D792 | 0.950 g/cm³ | |
| Environmental stress cracking resistance | 10%Igepal,F50 | ASTM D1693 | >1000 hr |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 0.045 g/10min |
| Thermal performance | Test Condition | Test Method | Poliolefinas Internacionales, C.A. (Polinter)/VENELENE® 7700M |
|---|---|---|---|
| vicat | ASTM D1525 | 128 °C | |
| Oxygen induction time | ASTM D3895 | >100 min |
Contact Us
Get App
Top