plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 FR70M30V0 DUPONT USA
Zytel® 
Fitness equipment,Household appliances,Electronic field,Electrical field
Mineral reinforcement,Antichemical,Flame retardant,Filler: Mineral filler,30% filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodDUPONT USA/FR70M30V0
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B238 °C
1.8MPa,UnannealedISO 75-2/A145 °C
Linear coefficient of thermal expansionTDISO 11359-28.1E-05 cm/cm/°C
MDISO 11359-26.4E-05 cm/cm/°C
Melting temperatureISO 11357-3263 °C
Vicat softening temperatureISO 306/B50235 °C
mechanical propertiesTest ConditionTest MethodDUPONT USA/FR70M30V0
Tensile modulusISO 527-26500 Mpa
Tensile strainBreakISO 527-22.0 %
tensile strengthBreakISO 527-273.0 Mpa
Electrical performanceTest ConditionTest MethodDUPONT USA/FR70M30V0
Compared to the anti leakage trace indexIEC 60112PLC 2
Dielectric strengthIEC 60243-140 KV/mm
Dissipation factor1MHzIEC 602500.014
100HzIEC 602500.014
Relative permittivity100HzIEC 602504.10
1MHzIEC 602503.70
Surface resistivityIEC 60093-- ohms
Volume resistivityIEC 60093>1.0E+15 ohms·cm
Physical propertiesTest ConditionTest MethodDUPONT USA/FR70M30V0
densityISO 11831.62 g/cm³
MediumDensity1.40 g/cm³
Shrinkage rateMDISO 294-41.0 %
TDISO 294-41.0 %
SpecificHeatCapacity of Melt1700 J/kg/°C
ThermalConductivityofMelt0.23 W/m/K
Top out temperature210 °C
Water absorption rateEquilibrium,23°C,2.00mm,50%RHISO 621.3 %
Saturation,23°C,2.00mmISO 624.0 %
impact performanceTest ConditionTest MethodDUPONT USA/FR70M30V0
Charpy Notched Impact Strength23°CISO 179/1eA2.5 kJ/m²
-30°CISO 179/1eA2.0 kJ/m²
Impact strength of cantilever beam gap-30°CISO 180/1A2.0 kJ/m²
23°CISO 180/1A2.0 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU20 kJ/m²
23°CISO 179/1eU20 kJ/m²
flammabilityTest ConditionTest MethodDUPONT USA/FR70M30V0
FMVSS flammabilityFMVSS302DNI
UL flame retardant rating0.75mmUL 94V-2
0.75mmIEC 60695-11-10,-20V-2
1.5mmIEC 60695-11-10,-20V-0
1.5mmUL 94V-0