Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic Plenco 04309 (Injection) Plastics Engineering Co.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodPlastics Engineering Co./Plenco 04309 (Injection)
Charpy Notched Impact StrengthASTM D25619.1 J/m
Impact strength of cantilever beam gapASTM D25621 J/m
hardnessTest ConditionTest MethodPlastics Engineering Co./Plenco 04309 (Injection)
Rockwell hardnessE计秤ASTM D78580
Electrical performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 04309 (Injection)
Volume resistivityASTM D2576.5E+12 ohms·cm
dielectric strengthASTM D1497.9 kV/mm
Dissipation Factor1MHzASTM D1500.060
dielectric constant1MHzASTM D1506.30
Compared to the Leakage Tracking Index (CTI)CTIUL 746PLC 3
arc resistanceASTM D495155 sec
Mechanical propertiesTest ConditionTest MethodPlastics Engineering Co./Plenco 04309 (Injection)
elongation断裂ASTM D6380.60 %
tensile strength ASTM D63848.0 MPa
compressive strengthASTM D695165 MPa
Flexural modulusASTM D7908620 MPa
Tensile modulusASTM D6389330 MPa
bending strengthASTM D79080.4 MPa
flammabilityTest ConditionTest MethodPlastics Engineering Co./Plenco 04309 (Injection)
UL flame retardant rating1.5mmUL 94V-0
Limiting Oxygen IndexASTM D286331 %
physical property Test ConditionTest MethodPlastics Engineering Co./Plenco 04309 (Injection)
Shrinkage rateMDASTM D9550.67 %
Water absorption rate24hrASTM D5700.19 %
Apparent densityASTM D18950.64 g/cm³
densityASTM D7921.54 g/cm³
Thermal performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 04309 (Injection)
Heat distortion temperature1.8MPa,未退火，HDTASTM D648164 °C
Continuous use temperatureASTM D794203 °C
Linear coefficient of thermal expansionMDASTME8314.8E-05 cm/cm/°C
thermal conductivity100°CASTMC1770.50 W/m/K

Contact Us

Get App

Top