Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM 500TL NC010 Dow DuPont
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | Dow DuPont/500TL NC010 |
|---|---|---|---|
| Pressure Range | 80-100 MPa | ||
| Melting temperature range | 210-220 ℃ | ||
| Mold temperature range | 80-100 ℃ | ||
| water content | ＜0.2 % |
| Mechanical properties | Test Condition | Test Method | Dow DuPont/500TL NC010 |
|---|---|---|---|
| elongation | 断裂 | ISO 527-1/-2 | 20 % |
| Impact strength of cantilever beam gap | -40℃ | ISO 180/1A | 6 KJ/㎡ |
| Tensile modulus | ISO 527-1/-2 | 3300 MPa | |
| Impact strength of cantilever beam gap | 23℃ | ISO 180/1A | 6 KJ/㎡ |
| Tensile strain | 屈服 | ISO 527-1/-2 | 14 % |
| Charpy Notched Impact Strength | ISO 179/leA | 5 KJ/㎡ | |
| Impact strength of simply supported beam without notch | ISO 179/leU | 160 KJ/㎡ | |
| Tensile stress | 屈服 | ISO 527-1/-2 | 71 MPa |
| Flexural modulus | ISO 178 | 3000 MPa |
| physical property | Test Condition | Test Method | Dow DuPont/500TL NC010 |
|---|---|---|---|
| Shrinkage rate | 平行 | 1.9 % | |
| Water absorption rate | ISO 62 | 0.17 % | |
| Shrinkage rate | 正常 | ISO 294-4 | 1.9 % |
| density | ISO 1183 | 1.43 g/cm³ | |
| melt mass-flow rate | 190℃，2.16kg | ISO 1133 | 14 g/10min |
| Thermal performance | Test Condition | Test Method | Dow DuPont/500TL NC010 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa，HDT | ISO 75-1/-2 | 165 ℃ |
| melting temperature | 10℃/min | ISO 3146℃ | 178 ℃ |
| Heat distortion temperature | 1.80MPa，HDT | ISO 75-1/-2 | 104 ℃ |
Contact Us
Get App
Top