Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC EXL1414 WH9A320 SABIC INNOVATIVE NANSHA

LEXAN™

Bottle cap,Home appliance components,Electrical applications

Processability,Moderate liquidity,Ductility,copolymer,Good demolding performanc

Plastic Datasheets

hardness	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/EXL1414 WH9A320
Rockwell hardness	L-Sale	ASTM D785	89
Rockwell hardness		R-Sale	ASTM D785	121

thermal performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/EXL1414 WH9A320
Ball Pressure Test	125°C	IEC 60695-10-2	Pass
Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	124 °C
		0.45MPa,Unannealed,3.20mm	ASTM D648	139 °C
		0.45MPa,Unannealed,100mmSpan	ISO 75-2/Be	140 °C
		1.8MPa,Unannealed,100mmSpan	ISO 75-2/Ae	128 °C
Linear coefficient of thermal expansion	MD：-40to40°C	ASTME831	7E-05 cm/cm/°C
		TD：-40to40°C	ASTME831	7.5E-05 cm/cm/°C
		TD：23to80°C	ISO 11359-2	7.2E-05 cm/cm/°C
		MD：23to80°C	ISO 11359-2	7.2E-05 cm/cm/°C
RTI Elec		UL 746	130 °C
RTI Imp		UL 746	120 °C
RTI Str		UL 746	125 °C
Vicat softening temperature	--	ISO 306/B120	146 °C
		--	ISO 306/B50	145 °C
			ASTM D152510	145 °C

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/EXL1414 WH9A320
Bending modulus	50.0mmSpan	ASTM D790	2230 Mpa
Bending modulus			ISO 178	2250 Mpa
bending strength	Yield,50.0mmSpan	ASTM D790	92.4 Mpa
bending strength			ISO 178	85.0 Mpa
elongation	Break	ASTM D638	98 %
elongation		Yield	ASTM D638	6.0 %
Tensile modulus		ASTM D638	2020 Mpa
Tensile modulus			ISO 527-2/1	2150 Mpa
Tensile strain	Break	ISO 527-2/50	120 %
Tensile strain		Yield	ISO 527-2/50	6.0 %
tensile strength	Yield	ASTM D638	55.5 Mpa
		Yield	ISO 527-2/50	57.0 Mpa
		Break	ISO 527-2/50	60.0 Mpa
		Break	ASTM D638	50.3 Mpa

Electrical performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/EXL1414 WH9A320
Dielectric constant	1MHz	ASTM D150	2.64
Dielectric constant		100Hz	ASTM D150	2.68
Dielectric strength	0.800mm,inOil	ASTM D149	16 KV/mm
Dissipation factor	1MHz	ASTM D150	9.3E-03
Dissipation factor		100Hz	ASTM D150	1.2E-03
Surface resistivity		ASTM D257	>1.0E+15 ohms
Volume resistivity		ASTM D257	>1.0E+15 ohms·cm

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/EXL1414 WH9A320
density		ISO 1183	1.19 g/cm³
density			ASTM D792	1.18 g/cm³
melt mass-flow rate	300°C/1.2kg	ASTM D1238	10 g/10min
Melt Volume Flow Rate (MVR)	300°C/1.2kg	ISO 1133	9.00 cm3/10min
Shrinkage rate	TD：3.20mm	Internal Method	0.40-0.80 %
Shrinkage rate		MD：3.20mm	Internal Method	0.40-0.80 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.15 %
Water absorption rate		Saturation,23°C	ISO 62	0.35 %

impact performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/EXL1414 WH9A320
Charpy Notched Impact Strength	23°C	ISO 179/1eA	70 kJ/m²
Charpy Notched Impact Strength		-30°C	ISO 179/1eA	65 kJ/m²
Dart impact	23°C,TotalEnergy	ASTM D3763	70.0 J
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	60 kJ/m²
		23°C	ISO 180/1A	70 kJ/m²
		23°C	ASTM D256	870 J/m
		-30°C	ASTM D256	770 J/m
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	NoBreak
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	NoBreak
Suspended wall beam without notch impact strength		23°C	ISO 180/1U	NoBreak

flammability	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/EXL1414 WH9A320
Burning wire flammability index	0.8mm	IEC 60695-2-12	850 °C
Burning wire flammability index		1.0mm	IEC 60695-2-12	960 °C
Hot filament ignition temperature	3.0mm	IEC 60695-2-13	875 °C
Hot filament ignition temperature		1.0mm	IEC 60695-2-13	875 °C
UL flame retardant rating	0.40mm	UL 94	HB

Get App

Top