plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM CP15X JAPAN POLYPLASTIC
DURACON®
Household appliances,Automotive sector,Electronic field,Electrical field
Aging resistance,wear resistant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/CP15X
ColourNumberCF2001
hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/CP15X
Rockwell hardnessM-ScaleISO 2039-283
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/CP15X
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A92.0 °C
Linear coefficient of thermal expansionMD:23to55°CInternal Method1.2E-04 cm/cm/°C
TD:23to55°CInternal Method1.2E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/CP15X
Bending modulusISO 1782450 Mpa
bending strengthISO 17887.0 Mpa
Friction coefficientDynamic2JISK72180.32
Steel - Dynamic3JISK72180.40
Nominal tensile fracture strainISO 527-240 %
Tensile modulusISO 527-22700 Mpa
tensile strengthISO 527-266.0 Mpa
Wear factor0.98MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
0.98MPa,0.30m/sec5JISK721824 10^-8mm³/N·m
0.060MPa,0.15m/sec6JISK7218500 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK72187000 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/CP15X
Dielectric strength3.00mmIEC 60243-119 KV/mm
Surface resistivityIEC 600931E+16 ohms
Volume resistivityIEC 600931E+14 ohms·cm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/CP15X
densityISO 11831.41 g/cm³
melt mass-flow rate190°C/2.16kgISO 11331.7 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11331.40 cm3/10min
Shrinkage rateTD:2.00mmISO 294-42.0 %
MD:2.00mmISO 294-42.3 %
Water absorption rate23°C,24hrISO 620.70 %
impact performanceTest ConditionTest MethodJAPAN POLYPLASTIC/CP15X
Charpy Notched Impact Strength23°CISO 179/1eA12 kJ/m²
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/CP15X
UL flame retardant ratingUL 94HB