Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC LUBEMIX 65 BLACK LUBEN PLAST srl
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | LUBEN PLAST srl/LUBEMIX 65 BLACK |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C4 | ASTM D256 | 40to45 kJ/m² |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 35to40 kJ/m² |
| Impact strength of cantilever beam gap | 23°C3 | ASTM D256 | 无断裂 |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 无断裂 |
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTM D256A | 400to450 J/m |
| Suspended wall beam without notch impact strength | 23°C | ISO 180 | 无断裂 |
| Impact strength of cantilever beam gap | 23°C | ISO 180/A | 35to40 kJ/m² |
| Mechanical properties | Test Condition | Test Method | LUBEN PLAST srl/LUBEMIX 65 BLACK |
|---|---|---|---|
| Tensile strain | 屈服 | ISO 527-2/1A/50 | 4.0to6.0 % |
| 断裂 | ISO 527-2/1A/50 | 35to40 % | |
| tensile strength | 断裂 | ISO 527-2/1A/50 | 40.0to45.0 MPa |
| Tensile modulus | ISO 527-2/1A/1 | 1800to2000 MPa | |
| Flexural modulus | ISO 178 | 1800to2200 MPa | |
| tensile strength | 屈服 | ISO 527-2/1A/50 | 40.0to45.0 MPa |
| bending strength | ISO 178 | 45.0to50.0 MPa |
| physical property | Test Condition | Test Method | LUBEN PLAST srl/LUBEMIX 65 BLACK |
|---|---|---|---|
| melt mass-flow rate | 260°C/5.0kg | ISO 1133 | 15to20 g/10min |
| density | ISO 1183/A | 1.11to1.15 g/cm³ |
| Thermal performance | Test Condition | Test Method | LUBEN PLAST srl/LUBEMIX 65 BLACK |
|---|---|---|---|
| vicat | -- | ISO 306/B120 | 120to130 °C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 120to130 °C |
| vicat | -- | ISO 306/A120 | 125to135 °C |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 115to125 °C |
| 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 100to110 °C |
Contact Us
Get App
Top