Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC EGN-2020KR MITSUBISHI ENGINEERING JAPAN
IUPILON™
fibre
High mobility,enhance,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2020KR |
---|---|---|---|
Hot deformation temperature | HDT | ASTM D648/ISO 75 | 141 ℃(℉) |
mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2020KR |
---|---|---|---|
Bending modulus | ASTM D790/ISO 178 | 5500 kg/cm²(MPa)[Lb/in²] | |
bending strength | ASTM D790/ISO 178 | 139 kg/cm²(MPa)[Lb/in²] | |
Elongation at Break | ASTM D638/ISO 527 | 2.9 % | |
tensile strength | ASTM D638/ISO 527 | 90.0 kg/cm²(MPa)[Lb/in²] |
other | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2020KR |
---|---|---|---|
characteristic | 磷含量.低(-无)、无溴、流动性高、阻燃性能 | ||
remarks | 以上加工数据.为参考值.以生产厂商设备的实际状况而进行调整 |
Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2020KR |
---|---|---|---|
Shrinkage rate | ASTM D955 | 0.25-0.45 % | |
Water absorption rate | ASTM D570/ISO 62 | 0.11 % |