Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 POLYBEST 6 PD natural POLYMA Kunststoff GmbH & Co. KG
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | POLYMA Kunststoff GmbH & Co. KG/POLYBEST 6 PD natural |
|---|---|---|---|
| Impact strength of cantilever beam gap | kJ/m² | 80 5.5 |
| hardness | Test Condition | Test Method | POLYMA Kunststoff GmbH & Co. KG/POLYBEST 6 PD natural |
|---|---|---|---|
| Rockwell hardness | R级 | 120 105 |
| Electrical performance | Test Condition | Test Method | POLYMA Kunststoff GmbH & Co. KG/POLYBEST 6 PD natural |
|---|---|---|---|
| Volume resistivity | ohms·cm | 1E+15 1E+11 | |
| Surface Resistivity | ohms | 1E+13 1E+11 | |
| Compared to the Leakage Tracking Index (CTI) | V | PLC 0 |
| Mechanical properties | Test Condition | Test Method | POLYMA Kunststoff GmbH & Co. KG/POLYBEST 6 PD natural |
|---|---|---|---|
| tensile strength | 屈服 | MPa | 85.0 45.0 |
| Tensile strain | 断裂 | % | 70 250 |
| Tensile modulus | MPa | 2900 1000 |
| flammability | Test Condition | Test Method | POLYMA Kunststoff GmbH & Co. KG/POLYBEST 6 PD natural |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | V-2 -- | |
| Burning wire flammability index | °C | 825 -- |
| physical property | Test Condition | Test Method | POLYMA Kunststoff GmbH & Co. KG/POLYBEST 6 PD natural |
|---|---|---|---|
| density | g/cm³ | 1.14 -- | |
| Shrinkage rate | % | 1.3 -- | |
| Water absorption rate | 23°C,24hr | % | 1.3 -- |
| Thermal performance | Test Condition | Test Method | POLYMA Kunststoff GmbH & Co. KG/POLYBEST 6 PD natural |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | °C | 180 -- |
| melting temperature | °C | 222 -- | |
| Continuous use temperature | °C | 80.0 -- | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | °C | 80.0 -- |
| vicat | °C | 206 -- |
Contact Us
Get App
Top