Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 AS-V0 NC EMS-CHEMIE SWITZERLAND
Grilon®
Industrial machinery,Household daily necessities
High hardness,High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/AS-V0 NC |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 65 kJ/m² |
Mechanical properties | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/AS-V0 NC |
---|---|---|---|
Tensile modulus | ISO 527-2 | 3900 Mpa | |
Nominal tensile fracture strain | ISO 527-2 | 9.0 % | |
Tensile strain | 屈服 | ISO 527-2 | 4.0 % |
tensile strength | 断裂 | ISO 527-2 | 80.0 Mpa |
屈服 | ISO 527-2 | 90.0 Mpa |
Electrical performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/AS-V0 NC |
---|---|---|---|
relative permittivity | 100 Hz | IEC 60250 | 3.00 |
Dissipation Factor | 1 MHz | IEC 60250 | 0.020 |
dielectric strength | IEC 60243-1 | 31 KV/mm | |
Volume resistivity | IEC 60093 | 1.0E+14 ohms·cm | |
Dissipation Factor | 100 Hz | IEC 60250 | 3.0E-3 |
relative permittivity | 1 MHz | IEC 60250 | 4.00 |
Surface Resistivity | IEC 60093 | -- ohms | |
Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V |
flammability | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/AS-V0 NC |
---|---|---|---|
Flammability level | UL 94 | V-0 | |
ISO Type | ISO 1874 | PA 66. MFHR. 14-040 | |
Limiting Oxygen Index | ISO 4589-2 | 32 % |
physical property | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/AS-V0 NC |
---|---|---|---|
Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 2.0 % |
Shrinkage rate | 流量 | ISO 294-4 | 0.90 % |
Water absorption rate | 饱和, 23°C | ISO 62 | 7.0 % |
Shrinkage rate | 横向流量 | ISO 294-4 | 1.1 % |
Thermal performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/AS-V0 NC |
---|---|---|---|
melting temperature | ISO 11357-3 | 260 °C | |
Heat distortion temperature | 0.45 MPa, 未退火,HDT | ISO 75-2/B | 225 °C |
1.8 MPa, 未退火,HDT | ISO 75-2/A | 75.0 °C | |
Continuous use temperature | --4 | 内部方法 | 200 °C |
Linear coefficient of thermal expansion | 流动 | ISO 11359-2 | 6.0E-5 cm/cm/°C |
横向 | ISO 11359-2 | 9.0E-5 cm/cm/°C | |
Continuous use temperature | --3 | ISO 2578 | 90.0 to 110 °C |
Contact Us
Get App
Top