PA6 K223-HGM24 PA6 vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Reference Price

PA6 DSM HOLAND K223-HGM24

US$ 2,990 / MT

FOB Guangzhou port, China

mechanical properties	Test Condition	Test Method	DSM HOLAND/K223-HGM24
bending strength		ISO 178	65.0 Mpa
Tensile modulus		ISO 527-2	2000 Mpa
Tensile strain	Yield	ISO 527-2	4.0 %
Nominal tensile fracture strain		ISO 527-2	> 50 %
tensile strength	Yield	ISO 527-2	50.0 Mpa
Bending modulus		ISO 178	1600 Mpa
thermal performance	Test Condition	Test Method	DSM HOLAND/K223-HGM24
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	130 °C
Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	1.2E-4 cm/cm/°C
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	55.0 °C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	1.2E-4 cm/cm/°C
Physical properties	Test Condition	Test Method	DSM HOLAND/K223-HGM24
density		ISO 1183	1.07 g/cm³
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	2.3 %
Shrinkage rate	Flow	ISO 294-4	1.4 %
Shrinkage rate		横向Flow	ISO 294-4	1.7 %
Water absorption rate	Saturation, 23°C	ISO 62	8.5 %
impact performance	Test Condition	Test Method	DSM HOLAND/K223-HGM24
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	18 kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch		-30°C	ISO 179/1eU	无断裂
Charpy Notched Impact Strength	23°C	ISO 179/1eA	65 kJ/m²
flammability	Test Condition	Test Method	DSM HOLAND/K223-HGM24
Hot filament ignition temperature	2.0 mm	IEC 60695-2-13	725 °C
Hot filament ignition temperature		1.5 mm	IEC 60695-2-13	725 °C
Burning wire flammability index	2.0 mm	IEC 60695-2-12	700 °C
Flammability level		UL 94	HB
Burning wire flammability index	1.5 mm	IEC 60695-2-12	700 °C
Electrical performance	Test Condition	Test Method	DSM HOLAND/K223-HGM24
Volume resistivity		IEC 60093	1.0E+15 ohms·cm
Dissipation factor	1 MHz	IEC 60250	0.016
Relative permittivity	100 Hz	IEC 60250	3.10
Relative permittivity		1 MHz	IEC 60250	2.70
Surface resistivity		IEC 60093	-- ohms
Dissipation factor	100 Hz	IEC 60250	3.0E-3
Dielectric strength		IEC 60243-1	27 KV/mm

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index