Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO(PPE) Generic PPE Generic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Generic/Generic PPE |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 44to380 J/m |
| Mechanical properties | Test Condition | Test Method | Generic/Generic PPE |
|---|---|---|---|
| elongation | 断裂,23°C | ISO 527-2 | 14to130 % |
| Flexural modulus | 23°C | ISO 178 | 100to2580 MPa |
| tensile strength | 断裂,23°C | ASTM D638 | 18.0to56.3 MPa |
| 23°C | ASTM D638 | 40.0to68.9 MPa | |
| Tensile modulus | 23°C | ASTM D638 | 2050to2720 MPa |
| Flexural modulus | 23°C | ASTM D790 | 2100to2770 MPa |
| tensile strength | 断裂,23°C | ISO 527-2 | 17.5to60.0 MPa |
| elongation | 屈服,23°C | ASTM D638 | 2.3to60 % |
| bending strength | 屈服,23°C | ASTM D790 | 53.9to114 MPa |
| tensile strength | 屈服,23°C | ASTM D638 | 39.2to76.0 MPa |
| elongation | 断裂,23°C | ASTM D638 | 8.8to280 % |
| Electrical performance | Test Condition | Test Method | Generic/Generic PPE |
|---|---|---|---|
| dielectric constant | 23°C | ASTM D150 | 2.54 |
| physical property | Test Condition | Test Method | Generic/Generic PPE |
|---|---|---|---|
| density | 23°C | ISO 1183 | 1.02to1.07 g/cm³ |
| -- | ASTM D792 | 1.02to1.10 g/cm³ | |
| Shrinkage rate | MD：23°C | ASTM D955 | 0.59to0.61 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.060to0.10 % |
| Thermal performance | Test Condition | Test Method | Generic/Generic PPE |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 81.2to151 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 60.0to200 °C | |
| vicat | ISO 306 | 140to193 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 6.0E-5到7.0E-5 cm/cm/°C |
Contact Us
Get App
Top