Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS+PPE DIC.PPS SE-730 DIC Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
Suspended wall beam without notch impact strengthASTM D256650 J/m
Impact strength of cantilever beam gapASTM D256100 J/m
hardnessTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
Rockwell hardnessM级ASTM D785100
R级ASTM D785121
Electrical performanceTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
Volume resistivityASTM D2571E+16 ohms·cm
Dissipation Factor1MHzASTM D1502E-03
dielectric constant1MHzASTM D1503.00
dielectric strength1.60mmASTM D14916 kV/mm
arc resistanceASTM D495120 sec
Mechanical propertiesTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
elongation at breakASTM D7902.7 %
elongation断裂ASTM D6382.2 %
tensile strength ASTM D638150 MPa
compressive strengthASTM D695170 MPa
Tensile modulusASTM D63811000 MPa
Flexural modulusASTM D79010000 MPa
coefficient of friction与钢-动态ASTM D18940.35
bending strengthASTM D790220 MPa
Poisson's ratio0.36
coefficient of friction与钢-静态ASTM D18940.36
flammabilityTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
UL flame retardant rating0.8mmUL 94V-0
physical property Test ConditionTest MethodDIC Corporation/DIC.PPS SE-730
Shrinkage rateMDASTM D9550.30 %
Water absorption rate23°C,24hrASTM D5700.040 %
Shrinkage rateTDASTM D9551.0 %
densityASTM D7921.48 g/cm³
Thermal performanceTest ConditionTest MethodDIC Corporation/DIC.PPS SE-730
Heat distortion temperature1.8MPa,未退火，HDTASTM D648255 °C
Linear coefficient of thermal expansionMD:-30到90°CASTM D6962.4E-05 cm/cm/°C
TD:-30到90°CASTM D6962.4E-05 cm/cm/°C

Contact Us

Get App

Top