Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PUR，Unspecified EN-1556 ELANTAS PDG Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | ELANTAS PDG Inc./EN-1556 |
|---|---|---|---|
| Shore hardness | 邵氏A | 80 |
| Supplementary Information | Test Condition | Test Method | ELANTAS PDG Inc./EN-1556 |
|---|---|---|---|
| Antifungal activity | Non-nutrient | ||
| Isocyanate (NCO) content | 5.2 % | ||
| Non volatile matter content - MixedSystem | 100 % |
| Electrical performance | Test Condition | Test Method | ELANTAS PDG Inc./EN-1556 |
|---|---|---|---|
| Volume resistivity | 25°C | 2.4E+12 ohms·cm | |
| 介电强度(3.18mm) | 14 kV/mm | ||
| insulation resistance | 25°C | 9E+11 ohms | |
| Volume resistivity | 121°C | 9.6E+10 ohms·cm | |
| dielectric constant | 25°C,1MHz | ASTM D150 | 5.06 |
| insulation resistance | 121°C | 4.2E+09 ohms | |
| dielectric constant | 耐电弧性 | ASTM D150 | >120 sec |
| 25°C,1kHz | ASTM D150 | 6.12 | |
| Surface Resistivity | --5 | 5.2E+13 ohms | |
| --4 | 3.5E+10 ohms |
| Mechanical properties | Test Condition | Test Method | ELANTAS PDG Inc./EN-1556 |
|---|---|---|---|
| Tensile modulus | 内部方法 | 9.65 MPa | |
| tensile strength | 34.5 MPa | ||
| elongation | 断裂 | 400 % |
| thermosetting | Test Condition | Test Method | ELANTAS PDG Inc./EN-1556 |
|---|---|---|---|
| Thermosetting components | 按重量计算的混合比 | 100 | |
| Thermosetting mixed viscosity | 25°C6 | 3000 cP | |
| 25°C7 | 18000 cP | ||
| Thermosetting components | 硬化法 | 按重量计算的混合比:33 |
| elastomer | Test Condition | Test Method | ELANTAS PDG Inc./EN-1556 |
|---|---|---|---|
| tear strength | 35.0 kN/m | ||
| compression set | 70°C,22hr | 35 % |
| physical property | Test Condition | Test Method | ELANTAS PDG Inc./EN-1556 |
|---|---|---|---|
| density | --2 | 1.05 g/cm³ | |
| --1 | 1.03 g/cm³ | ||
| 吸水率-4hourimmersioninD.I.water@00°F | 0.33 % | ||
| 收缩性-Volume | 3.6 % |
Contact Us
Get App
Top