Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PEEK 550CA30 JILIN JOINATURE

ZYPEEK®

Aerospace,Electrical field,Electronic field,Electric wire,Cable,Industrial machinery,Medical supplies,Nursing supplies

enhance,Carbon fiber reinforced,Moderate liquidity

Plastic Datasheets

thermal performance	Test Condition	Test Method	JILIN JOINATURE/550CA30
Glass transition temperature	起始	ISO 11357	143 °C
Hot deformation temperature	1.8 Mpa	ISO 75-f	336 °C
Linear coefficient of thermal expansion	低于Tg沿着Flow	ISO 11359	5 ppm/K
Linear coefficient of thermal expansion		高于Tg沿着Flow	ISO 11359	6 ppm/K
Melting temperature		ISO 11357	343 °C
specific heat	23℃	DSC	1.8 kJ/kg/℃
thermal conductivity	23℃	ISO 22007-4	0.95 W/m/K

mechanical properties	Test Condition	Test Method	JILIN JOINATURE/550CA30
Bending modulus	23℃	ISO 178	22000 Mpa
bending strength	Break，23℃	ISO 178	370 Mpa
compressive strength	23℃	ISO 604	300 Mpa
Shore hardness	23℃	ISO 868	88 D 级
Tensile strain	Break，23℃	ISO 527	1.6 %
tensile strength	Break，23℃	ISO 527	250 Mpa

Electrical performance	Test Condition	Test Method	JILIN JOINATURE/550CA30
Volume resistivity	23 ℃，1V	IEC 60093	10^5 ohms·cm

Physical properties	Test Condition	Test Method	JILIN JOINATURE/550CA30
density	结晶	ISO 1183	1.4 g/cm³
melt mass-flow rate	380℃，5.0kg	ISO 1133	5 g/10min
Shrinkage rate	MD	ISO 294-4	0.5 %
Shrinkage rate		TD	ISO 294-4	0.1 %
Water absorption rate	23℃，24hr，3.2 mm厚拉伸棒	ISO 62-1	0.04 %
Water absorption rate		Equilibrium，23℃，3.20 mm厚拉伸棒	ISO 62-1	0.3 %

impact performance	Test Method	JILIN JOINATURE/550CA30
Charpy Notched Impact Strength	ISO 179/1eA	7 kJ/m²
Charpy Notched Impact Strength		ISO 179/1U	45 kJ/m²
Impact strength of cantilever beam gap	ISO 180/U	45 kJ/m²
Impact strength of cantilever beam gap	有Notched	ISO 180-A	9 kJ/m²

Get App

Top