Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 PA6 C BK Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/PA6 C BK |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 43 J/m |
| hardness | Test Condition | Test Method | Techmer Polymer Modifiers/PA6 C BK |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 99 |
| Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/PA6 C BK |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 2.0 % |
| Flexural modulus | ASTM D790 | 4340 MPa | |
| tensile strength | 屈服 | ASTM D638 | 79.3 MPa |
| bending strength | ASTM D790 | 131 MPa |
| Electrical performance | Test Condition | Test Method | Techmer Polymer Modifiers/PA6 C BK |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1.0E+2到1.0E+4 ohms·cm |
| physical property | Test Condition | Test Method | Techmer Polymer Modifiers/PA6 C BK |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.90 % |
| density | ASTM D792 | 1.26 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 1.2 % |
| Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/PA6 C BK |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 127 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 196 °C |
Contact Us
Get App
Top