Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PP Copolymer SAXALEN™ PPC339T20 SAX AUSTRIA
--
--
Filler, mineral filler, 20%, filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Mechanical properties | Test Condition | Test Method | SAX AUSTRIA/SAXALEN™ PPC339T20 |
---|---|---|---|
Tensile modulus | 23°C | ISO 527-2 | 2400 MPa |
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 7.00 kJ/m² |
Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 24.0 kJ/m² |
23°C | ISO 180/1U | 55.0 kJ/m² | |
Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 4.00 kJ/m² |
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 50.0 kJ/m² |
Flexural modulus | 23°C | ISO 178 | 2000 MPa |
Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 5.00 kJ/m² |
Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 5.00 kJ/m² |
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 25.0 kJ/m² |
tensile strength | 23°C | ISO 527-2 | 25.0 MPa |
elongation at break | 23°C | ISO 527-2 | 18.0 % |
bending strength | 23°C | ISO 178 | 33.0 MPa |
physical property | Test Condition | Test Method | SAX AUSTRIA/SAXALEN™ PPC339T20 |
---|---|---|---|
density | 1.05 g/cm³ | ||
melt mass-flow rate | ISO 1033 | 12.0 cm³/10min |
Thermal performance | Test Condition | Test Method | SAX AUSTRIA/SAXALEN™ PPC339T20 |
---|---|---|---|
Heat distortion temperature | 1.80MPa退火,HDT | ISO 75-2/Af | 70.0 °C |
vicat | ISO 306/B50 | 75.0 °C |
Contact Us
Get App
Top