Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

LCP A950 JAPAN POLYPLASTIC

LAPEROS®

Automotive sector,Camera applications,Electrical field,Electronic field,Optical applications

Corrosion resistance,Thermal stability,Weather resistance,High rigidity,high strength,damping,Flame retardant

Plastic Datasheets

Basic Performance	Test Condition	Test Method	JAPAN POLYPLASTIC/A950
density		ISO 1183	1400 kg/m
Water absorption rate	23℃/50rh	ISO 62	0.030 %

thermal performance	Test Condition	Test Method	JAPAN POLYPLASTIC/A950
Combustibility		UL 94	V-0
Hot deformation temperature	1.80MPa	ISO 75-1	187 °C
Linear coefficient of thermal expansion	normal	ISO 11359-1	0.000038 cm/cm℃
Linear coefficient of thermal expansion		parallel	ISO 11359-1	4E-06 cm/cm℃
Vicat softening temperature	50℃/h 50N	ISO 306	145 °C

mechanical properties	Test Condition	Test Method	JAPAN POLYPLASTIC/A950
Bending modulus	23℃	ISO 178	9100 Mpa
bending strength	23℃	ISO 178	158 Mpa
Charpy Notched Impact Strength	23℃	ISO 179/1eA	95.0 KJ/m
		-30℃	ISO 179/1eU	53.0 KJ/m
		23℃	ISO 179/1eU	267 KJ/m
Fracture strain		ISO 527-1	3.4 %
Fracture stress		ISO 527-1	182 Mpa
Impact strength of cantilever beam gap	23℃	ISO 180/1A	95.0 KJ/m
Suspended wall beam without notch impact strength	23℃	ISO 180/1U	252 KJ/m
Tensile creep modulus	1hr	ISO 899-1	9000 Mpa
Tensile creep modulus		1000hr	ISO 899-1	6600 Mpa
Tensile modulus		ISO 527-1	10600 Mpa

Electrical performance	Test Condition	Test Method	JAPAN POLYPLASTIC/A950
Dielectric loss	100Hz	IEC 60250	0.016
Dielectric loss		1000Hz	IEC 60250	0.020
Dielectric strength		IEC 60243-1	47 KV/mm
Relative permittivity	100Hz	IEC 60250	3.20
Relative permittivity		1000Hz	IEC 60250	3.00
Surface resistivity		IEC 60093	1E+14 ohms
Volume resistivity		IEC 60093	1E+13 ohm.m

Physical properties	Test Condition	Test Method	JAPAN POLYPLASTIC/A950
Shrinkage rate	parallel	ISO 2577	0.70 %
Shrinkage rate		normal	ISO 2577	0.0 %

Get App

Top