Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA46 MC50 BK DSM HOLAND
Stanyl®
Home appliance components,Electronic and electrical components
Glass fiber reinforced,Thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | DSM HOLAND/MC50 BK |
---|---|---|---|
Hot deformation temperature | 0.45 MPa, Unannealed | ISO 75-2/B | 290 °C |
1.8 MPa, Unannealed | ISO 75-2/A | 290 °C | |
Linear coefficient of thermal expansion | Across Flow | ISO 11359-2 | 4.0E-5 cm/cm/°C |
Flow | ISO 11359-2 | 3.5E-5 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 295 °C | |
RTI Elec | 0.75 mm | UL 746 | 65.0 °C |
mechanical properties | Test Condition | Test Method | DSM HOLAND/MC50 BK |
---|---|---|---|
Bending modulus | ISO 178 | 12500 Mpa | |
Tensile modulus | ISO 527-2 | 12500 Mpa | |
Tensile strain | Break | ISO 527-2 | 2.5 % |
tensile strength | Break | ISO 527-2 | 200 Mpa |
Electrical performance | Test Condition | Test Method | DSM HOLAND/MC50 BK |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | V | |
Dielectric strength | IEC 60243-1 | 33 KV/mm | |
Relative permittivity | 100 Hz | IEC 60250 | 4.80 |
1 MHz | IEC 60250 | 4.40 | |
Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm |
Physical properties | Test Condition | Test Method | DSM HOLAND/MC50 BK |
---|---|---|---|
Shrinkage rate | 横向Flow | ISO 294-4 | 1.1 % |
Flow | ISO 294-4 | 0.40 % | |
Water absorption rate | Equilibrium, 23°C, 50% RH | ISO 62 | 2.3 % |
impact performance | Test Condition | Test Method | DSM HOLAND/MC50 BK |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 60 kJ/m² |
flammability | Test Condition | Test Method | DSM HOLAND/MC50 BK |
---|---|---|---|
Flammability level | UL 94 | V-2 |