plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 Ultraflow K-FHG6 DSM Additive Manufacturing
--
--
Filler, glass fiber reinforced material, 30%, filler by weight,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodDSM Additive Manufacturing/ Ultraflow K-FHG6
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B220 °C
1.8MPa,UnannealedISO 75-2/A200 °C
Linear coefficient of thermal expansionTDISO 11359-27E-05 cm/cm/°C
MDISO 11359-22E-05 cm/cm/°C
Melting temperatureISO 11357-3220 °C
mechanical propertiesTest ConditionTest MethodDSM Additive Manufacturing/ Ultraflow K-FHG6
Bending modulusISO 1788500 MPa
bending strengthISO 178235 MPa
Tensile modulusISO 527-29350 MPa
Tensile strainBreakISO 527-23.0 %
tensile strengthBreakISO 527-2160 MPa
Electrical performanceTest ConditionTest MethodDSM Additive Manufacturing/ Ultraflow K-FHG6
Compared to the anti leakage trace indexIEC 60112 V
Dissipation factor1MHzIEC 602500.015
100HzIEC 602505E-03
Relative permittivity100HzIEC 602503.50
1MHzIEC 602503.30
Surface resistivityIEC 60093-- ohms
Volume resistivityIEC 60093>1.0E+15 ohms·cm
Physical propertiesTest ConditionTest MethodDSM Additive Manufacturing/ Ultraflow K-FHG6
densityISO 11831.35 g/cm³
Shrinkage rateMDISO 294-40.30 %
TDISO 294-41.1 %
Water absorption rateEquilibrium,23°C,50%RHISO 621.8 %
Saturation,23°CISO 626.0 %
impact performanceTest ConditionTest MethodDSM Additive Manufacturing/ Ultraflow K-FHG6
Charpy Notched Impact Strength23°CISO 179/1eA14 kJ/m²
-30°CISO 179/1eA10 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU65 kJ/m²
23°CISO 179/1eU85 kJ/m²
flammabilityTest ConditionTest MethodDSM Additive Manufacturing/ Ultraflow K-FHG6
UL flame retardant rating1.6mmIEC 60695-11-10,-20HB

Contact Us

Get App

Top