Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEI+PCE ULTEM™ ATX200F resin SABIC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC/ULTEM™ ATX200F resin |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 53 J/m |
| 23°C | ASTM D4812 | 2100 J/m | |
| 3.20mm | ASTM D256 | 2700 J/m |
| Electrical performance | Test Condition | Test Method | SABIC/ULTEM™ ATX200F resin |
|---|---|---|---|
| High arc combustion index (HAI) | HAI | UL 746 | PLC 4 |
| Hot wire ignition (HWI) | HWI | UL 746 | PLC 0 |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 4 |
| Mechanical properties | Test Condition | Test Method | SABIC/ULTEM™ ATX200F resin |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 70 % |
| bending strength | Yield,100mmSpan | ASTM D790 | 145 MPa |
| tensile strength | 屈服 | ASTM D638 | 96.5 MPa |
| Flexural modulus | 100mmSpan | ASTM D790 | 3170 MPa |
| flammability | Test Condition | Test Method | SABIC/ULTEM™ ATX200F resin |
|---|---|---|---|
| UL flame retardant rating | 0.76mm | UL 94 | V-2 |
| 1.5mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | SABIC/ULTEM™ ATX200F resin |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.50to0.70 % |
| density | ASTM D792 | 1.26 g/cm³ | |
| melt mass-flow rate | 337°C/6.6kg | ASTM D1238 | 24 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC/ULTEM™ ATX200F resin |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 191 °C |
| RTI Imp | UL 746 | 115 °C | |
| RTI Str | UL 746 | 115 °C | |
| RTI Elec | UL 746 | 115 °C |
Contact Us
Get App
Top