plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PBT B4300K6 BASF GERMANY

Ultradur®

Engineering accessories,Shell,electrical machinery,printed circuit board

High rigidity,Glass fiber reinforced

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

thermal performance	Test Condition	Test Method	BASF GERMANY/B4300K6
Hot deformation temperature	1.8 MPa，Unannealed264 psi, Unannealed	ISO 75-2/A	95 °C
Hot deformation temperature		0.45 MPa，Unannealed66 psi, Unannealed	ISO 75-2/B	200 °C
Linear coefficient of thermal expansion	MD：23~80℃MD：23 to 80℃	ISO 11359-2	7.0E-5 - 8.0E-5 1/℃
Maximum operating temperature	short cycle operation		200 °C
Melting temperature		ISO 11357-3	223 °C
specific heat			1500 J/kg/℃
Temperature index - at 50% loss of tensile strength	---- 66	IEC 60216	120 °C
Temperature index - at 51% loss of tensile strength	---- 77	IEC 60216	130 °C
thermal conductivity		DIN 52612	0.27 W/m/K

mechanical properties	Test Condition	Test Method	BASF GERMANY/B4300K6
Ball Pressure Test	H358/30	ISO 2039-1	165 Mpa
Tensile creep modulus	1000 hr1000 hr5	ISO 899-1	2200 Mpa
Tensile modulus		ISO 527-2	4000 Mpa
Tensile strain	BreakBreak	ISO 527-2	5 %
tensile strength	BreakBreak	ISO 527-2	50 Mpa

flame retardant performance	Test Condition	Test Method	BASF GERMANY/B4300K6
UL flame retardant rating	0.75 mm		HB
UL flame retardant rating		1.6 mm		HB

Electrical performance	Test Condition	Test Method	BASF GERMANY/B4300K6
Compared to the anti leakage trace index	Solution ASolution A	IEC 60112	V
Compared to the anti leakage trace index		Solution BSolution B	IEC 60112	V
Dissipation factor	1 MHz1 MHz	IEC 60250	0.019
Dissipation factor		100 Hz100 Hz	IEC 60250	0.0012
Relative permittivity	100 Hz100 Hz	IEC 60250	3.8
Relative permittivity		1 MHz1 MHz	IEC 60250	3.8
Surface resistivity		IEC 60093	10000000000000 ohms
Volume resistivity		IEC 60093	10000000000000000 ohms·cm

Physical properties	Test Condition	Test Method	BASF GERMANY/B4300K6
Apparent density			0.70 to 0.80 g/cm³
Melt Volume Flow Rate (MVR)	250℃，2.16 kg250℃/2.16 kg	ISO 1133	9 cm3/10min
Shrinkage rate	MD：自由的free, longitudinal		1.7 %
Shrinkage rate		TD：自由的free, transverse		1.7 %
Stickiness		ISO 307	113 cm³/g
Water absorption rate	Saturation，23℃Saturation, 73°F	ISO 62	0.4 %
Water absorption rate		Equilibrium，23℃，50% RHEquilibrium, 73°F, 50% RH	ISO 62	0.2 %

impact performance	Test Condition	Test Method	BASF GERMANY/B4300K6
Impact strength of simply supported beam without notch	23℃23°C	ISO 179/1eU	35 kJ/m²
Impact strength of simply supported beam without notch		-30°C -30°C	ISO 179/1eU	24 kJ/m²

Contact Us

Get App

Top