Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 3030JFX1 UBE JAPAN
UBESTA 
Pipe fittings、Automotive sector
Good flexibility、Thermal stability、Low temperature resistanc、Aging resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Mechanical propertiesTest ConditionTest MethodUBE JAPAN/3030JFX1
bending strengthASTM D790/ISO 17820 kg/cm²(MPa)[Lb/in²]
elongation at breakASTM D412/ISO 527＞200 %
tensile strength ASTM D412/ISO 52726 kg/cm²(MPa)[Lb/in²]
Rockwell hardnessASTM D78562
tensile strength 屈服ISO 527-1/-226 Mpa
elongation断裂ISO 527-1/-2＞200 %
bending strengthISO 17820 Mpa
Flexural modulusISO 178400 Mpa
Charpy Notched Impact Strength23℃ISO 179/1eA120P KJ/m
-40℃ISO 179/1eA3C KJ/m
Flexural modulusASTM D412/ISO 527400 kg/cm²(MPa)[Lb/in²]
Rockwell hardnessISO 2039-262 R
Shore hardnessISO 86870 D
Electrical performanceTest ConditionTest MethodUBE JAPAN/3030JFX1
Volume resistivityASTM D257/IEC 600931012 Ω.cm
IEC 6009310 Ω.cm
Physical propertiesTest ConditionTest MethodUBE JAPAN/3030JFX1
Shrinkage rateASTM D9550.9/1.5 %
melt mass-flow rateASTM D1238/ISO 11337 g/10min
densityASTM D792/ISO 11831.03 kg·cm/cm(J/M)ft·lb/in
physical property Test ConditionTest MethodUBE JAPAN/3030JFX1
Water absorption rateISO 620.6 %
Shrinkage rateISO 294-40.9/1.5 %
melt mass-flow rateISO 11337 g/10min
melting temperatureISO 11357-3171 °C
Thermal performanceTest ConditionTest MethodUBE JAPAN/3030JFX1
Linear coefficient of thermal expansionISO 11359-21.9
Heat distortion temperatureHDTASTM D648/ISO 7545 ℃（℉）
1.8Mpa，HDTISO 75-245 °C
0.45Mpa，HDTISO 75-280 °C
melting temperature171 ℃（℉）
Linear coefficient of thermal expansionASTM D696/ISO 113591.9 mm/mm.℃

Contact Us

Get App

Top