plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC GSH2010PH CB9501 MITSUBISHI ENGINEERING JAPAN
IUPILON™ 
Automotive Applications,electrical equipment,Phone
Glass fiber reinforced,Filler: Glass fiber reinf,10% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/GSH2010PH CB9501
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B132 °C
1.8MPa,UnannealedISO 75-2/A125 °C
Linear coefficient of thermal expansionTDISO 11359-25.8E-05 cm/cm/°C
MDISO 11359-25.8E-05 cm/cm/°C
mechanical propertiesTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/GSH2010PH CB9501
Bending modulusISO 1782700 Mpa
bending strengthISO 17890.0 Mpa
Nominal tensile fracture strainISO 527-210 %
Tensile modulusISO 527-22900 Mpa
Tensile strainYieldISO 527-25.0 %
tensile strengthYieldISO 527-252.0 Mpa
Electrical performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/GSH2010PH CB9501
Compared to the anti leakage trace indexCTIUL 746PLC 3
Physical propertiesTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/GSH2010PH CB9501
melt mass-flow rate300°C/1.2kgISO 113315 g/10min
Melt Volume Flow Rate (MVR)300°C/1.2kgISO 113314.0 cm3/10min
Shrinkage rate吸水率(Saturation,23°C)0.14 %
MD:3.20mm0.30-0.50 %
TD:3.20mm0.30-0.50 %
impact performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/GSH2010PH CB9501
Impact strength of simply supported beam without notch23°CISO 179NoBreak
flammabilityTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/GSH2010PH CB9501
UL flame retardant rating0.40mmUL 94HB