Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 RP004 GYMDNATL SABIC INNOVATIVE US
LNP™ LUBRICOMP™ 
Home appliance components
Thermal stability,UV resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodSABIC INNOVATIVE US/RP004 GYMDNATL
Hot deformation temperature0.45MPa,Unannealed,64.0mmSpanISO 75-2/Bf200 °C
1.8MPa,未退火,64.0mm跨距ISO 75-2/Af63.0 °C
1.8MPa,未退火,3.20mmASTM D64864.0 °C
0.45MPa,未退火,3.20mmASTM D648237 °C
Linear coefficient of thermal expansionTD：-30to30°CASTM D6969.4E-05 cm/cm/°C
MD：-30到30°CASTM D6968.4E-05 cm/cm/°C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/RP004 GYMDNATL
Bending modulusISO 1782400 Mpa
50.0mm跨距ASTM D7902260 Mpa
elongation断裂ASTM D63823 %
屈服ASTM D63822 %
Friction coefficientDynamicASTM D3702Modified0.020
StaticASTM D3702Modified0.045
Tensile modulusASTM D6382620 Mpa
ISO 527-2/12730 Mpa
Tensile strain断裂ISO 527-2/527 %
屈服ISO 527-2/526 %
tensile strength断裂ISO 527-2/563.0 Mpa
屈服ASTM D63861.0 Mpa
屈服ISO 527-2/563.0 Mpa
断裂ASTM D63861.0 Mpa
Wear factorWasherASTM D3702Modified3.50 10^-10in^5-min/ft-lb-hr
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/RP004 GYMDNATL
Shrinkage rateTD：24hrASTM D9551.0-3.0 %
MD：24小时ASTM D9551.0-3.0 %
Water absorption rate24hr,50%RHASTM D5700.84 %
平衡,23°C,50%RHISO 621.1 %
impact performanceTest ConditionTest MethodSABIC INNOVATIVE US/RP004 GYMDNATL
Dart impact23°C,TotalEnergyASTM D37636.70 J
Impact strength of cantilever beam gap23°CISO 180/1A5.2 kJ/m²
Multi axis Instrumented Impact EnergyISO 6603-21.20 J
Suspended wall beam without notch impact strength23°CISO 180/1U88 kJ/m²

Contact Us

Get App

Top