Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 TECAST™ 6XAU ENSINGER GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | ENSINGER GERMANY/TECAST™ 6XAU |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 115 R |
| Electrical performance | Test Condition | Test Method | ENSINGER GERMANY/TECAST™ 6XAU |
|---|---|---|---|
| dielectric constant | ASTM D150 | 3.7 60Hz | |
| Dissipation Factor | ASTM D150 | 0.002 60Hz | |
| Volume resistivity | ASTM D257 | 1E+14 Ω.cm | |
| dielectric strength | ASTM D149 | 19.7 KV/mm |
| Mechanical properties | Test Condition | Test Method | ENSINGER GERMANY/TECAST™ 6XAU |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 86.2 MPa |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 37.0 J/m |
| Tensile modulus | 23°C | ASTM D638 | 2410 MPa |
| Flexural modulus | 23°C | ASTM D790 | 2410 MPa |
| elongation at break | 23°C | ASTM D638 | 20 % |
| tensile strength | 屈服,23°C | ASTM D638 | 75.8 MPa |
| physical property | Test Condition | Test Method | ENSINGER GERMANY/TECAST™ 6XAU |
|---|---|---|---|
| Water absorption rate | (23°C,24hr) | ASTM D570 | 1.2 % |
| density | ASTM D792 | 1.15-1.16 g/cm³ |
| Thermal performance | Test Condition | Test Method | ENSINGER GERMANY/TECAST™ 6XAU |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD | ASTM D696 | 7.2E-04 cm/cm／°C |
| Heat distortion temperature | 1.80MPa未退火，HDT | ASTM D648 | 93.3 °C |
| Linear coefficient of thermal expansion | 最大使用温度 | 177 °C | |
| 熔点 | ASTM D2133 | 220 °C | |
| Heat distortion temperature | 0.45MPa未退火，HDT | ASTM D648 | 188 °C |
Contact Us
Get App
Top