Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 B3GF25V0 BK9005 CELANESE NANJING
FRIANYL®
Industrial applications,Automotive sector,Consumer product applications,Electronic and Electrical Applications
Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | CELANESE NANJING/B3GF25V0 BK9005 |
---|---|---|---|
Ball Pressure Test | 125°C | IEC 60695-10-2 | 通过 |
165°C | IEC 60695-10-2 | 通过 | |
Continuous use temperature | IEC 60216 | 110 °C | |
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 220 °C |
1.8MPa,Unannealed | ISO 75-2/A | 210 °C |
mechanical properties | Test Condition | Test Method | CELANESE NANJING/B3GF25V0 BK9005 |
---|---|---|---|
Tensile modulus | 23°C | ISO 527-2 | 8000 Mpa |
Tensile strain | Break,23°C | ISO 527-2 | 4.5 % |
tensile strength | Yield,23°C | ISO 527-2 | 170 Mpa |
Electrical performance | Test Condition | Test Method | CELANESE NANJING/B3GF25V0 BK9005 |
---|---|---|---|
Compared to the anti leakage trace index | 3.20mm,SolutionA | IEC 60112 | PLC 0 |
Dielectric strength | 2.00mm | IEC 60243-1 | 18 KV/mm |
Needle flame test | 2.00mm | IEC 60695-11-5 | 通过 |
1.00mm | IEC 60695-11-5 | 通过 | |
Surface resistivity | IEC 60093 | 1E+13 ohms | |
Volume resistivity | 23°C | IEC 60093 | 1E+15 ohms·cm |
Physical properties | Test Condition | Test Method | CELANESE NANJING/B3GF25V0 BK9005 |
---|---|---|---|
Shrinkage rate | TD:23°C | ISO 294-4 | 0.80 % |
MD:23°C | ISO 294-4 | 0.30 % | |
Water absorption rate | Saturation,23°C | ISO 62 | 5.0 % |
23°C,24hr | ISO 62 | 1.9 % |
impact performance | Test Condition | Test Method | CELANESE NANJING/B3GF25V0 BK9005 |
---|---|---|---|
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 无断裂 |
23°C | ISO 179/1eU | 无断裂 |
flammability | Test Condition | Test Method | CELANESE NANJING/B3GF25V0 BK9005 |
---|---|---|---|
Burning wire flammability index | 0.8mm | IEC 60695-2-12 | 960 °C |
3.2mm | IEC 60695-2-12 | 960 °C | |
Extreme Oxygen Index | ISO 4589-2 | 30 % | |
Hot filament ignition temperature | 3.2mm | IEC 60695-2-13 | 800 °C |
0.8mm | IEC 60695-2-13 | 775 °C | |
UL flame retardant rating | 3.2mm | UL 94 | V-0 |
0.8mm | UL 94 | V-0 | |
1.6mm | UL 94 | V-0 | |
0.40mm | UL 94 | V-0 |