PA46 TE200F6 PA46 vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Certificates

Reference Price

PA46 DSM HOLAND TE200F6

Flame retardant enhanced grade

US$ 7,030 / MT

FOB Guangzhou port, China

mechanical properties	Test Condition	Test Method	DSM HOLAND/TE200F6
tensile strength	Break, 120°C	ISO 527-2	110 Mpa
		Break, 180°C	ISO 527-2	95.0 Mpa
		Break, 160°C	ISO 527-2	100 Mpa
Tensile strain	Break, 160°C	ISO 527-2	7.5 %
Bending modulus	--	ISO 178	9000 Mpa
Tensile strain	Break	ISO 527-2	4.0 %
Tensile strain		Break, 180°C	ISO 527-2	7.5 %
tensile strength	Break	ISO 527-2	210 Mpa
Tensile modulus	--	ISO 527-2	10000 Mpa
		180°C	ISO 527-2	4400 Mpa
		200°C	ISO 527-2	4000 Mpa
Tensile strain	Break, 120°C	ISO 527-2	7.5 %
Tensile modulus	120°C	ISO 527-2	5500 Mpa
Bending modulus	160°C	ISO 178	3900 Mpa
Bending modulus		120°C	ISO 178	4700 Mpa
Tensile modulus	160°C	ISO 527-2	5000 Mpa
Tensile strain	Break, 200°C	ISO 527-2	7.5 %
tensile strength	Break, 200°C	ISO 527-2	90.0 Mpa
thermal performance	Test Condition	Test Method	DSM HOLAND/TE200F6
Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	6.0E-5 cm/cm/°C
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	290 °C
Hot deformation temperature		1.8 MPa, Unannealed	ISO 75-2/A	290 °C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	2.5E-5 cm/cm/°C
Thermal Index - 5000 hr		IEC 60216	159 °C
Melting temperature		ISO 11357-3	295 °C
Physical properties	Test Condition	Test Method	DSM HOLAND/TE200F6
density		ISO 1183	1.41 g/cm³
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	2.6 %
Shrinkage rate	Flow	ISO 294-4	0.50 %
Shrinkage rate		横向Flow	ISO 294-4	1.3 %
impact performance	Test Condition	Test Method	DSM HOLAND/TE200F6
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	11 kJ/m²
Impact strength of cantilever beam gap	23°C	ISO 180/1A	12 kJ/m²
Impact strength of cantilever beam gap		-40°C	ISO 180/1A	11 kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	80 kJ/m²
Impact strength of simply supported beam without notch		-30°C	ISO 179/1eU	65 kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179/1eA	12 kJ/m²
Electrical performance	Test Condition	Test Method	DSM HOLAND/TE200F6
Compared to the anti leakage trace index		IEC 60112	PLC 1
Volume resistivity		IEC 60093	1.0E+15 ohms·cm
Relative permittivity	100 Hz	IEC 60250	4.40
		1 MHz	IEC 60250	4.00
		1.00 GHz	IEC 60250	3.60
Dielectric strength		IEC 60243-1	35 KV/mm
flammability	Test Condition	Test Method	DSM HOLAND/TE200F6
Flammability level		UL 94	HB

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index